[mrtg] Re: SNMP Response errors

Fauteux, Joe Joe.Fauteux at Paymentech.com
Tue May 21 19:46:50 MEST 2002


what is it that you are trying to monitor here?  - that OID looks like
interface description  - not sure what that #sc0 is

-----Original Message-----
From: Alan Rader [mailto:arader at finishline.com]
Sent: Tuesday, May 21, 2002 12:14 PM
To: 'MRTG'
Subject: [mrtg] SNMP Response errors



Below is my issue.  This is on a Cisco 6500 Switch. 

****************************************************************************
****************
SNMP Error:
no response received
SNMPv1_Session (remote host: "10.0.0.4" [10.0.0.4].161)
                  community: "mycommunity"
                 request ID: 2103646371
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPWALK Problem for 1.3.6.1.2.1.2.2.1.2 on mycommunity at 10.0.0.4
SNMP Error:
no response received
****************************************************************************
******************
If I use Getif on the above OID, I get info back.  If I use snmputil I get
the following:

****************************************************************************
******************
C:\>snmputil get 10.0.0.4 mycommunity .1.3.6.1.2.1.2.2.1.2
Error: errorStatus=2, errorIndex=1

C:\>snmputil get 10.0.0.4 mycommunity .1.3.6.1.2.1.2.2.1.2.0
Error: errorStatus=2, errorIndex=1
****************************************************************************
******************

Now, looking at my config file, I don't even see that OID in it anywhere, my
config uses descriptions or something like #sc0.  So 

1.  Anyone know what might be wrong?
2.  How do I find out which part of my config is in error?

****************************************************************************
******************
Target[10.0.0.4_sc0]: #sc0:mycommunity at 10.0.0.4:
SetEnv[10.0.0.4_sc0]: MRTG_INT_IP="10.0.0.4" MRTG_INT_DESCR="sc0"
MaxBytes[10.0.0.4_sc0]: 1250000
Title[10.0.0.4_sc0]: Traffic Analysis for sc0 -- TFL_6509_Office_B
PageTop[10.0.0.4_sc0]: <H1>Traffic Analysis for sc0 --
TFL_6509_Office_B</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>TFL_6509_Office_B in Data Center</TD></TR>
   <TR><TD>Maintainer:</TD> <TD>Alan</TD></TR>
   <TR><TD>Description:</TD><TD>sc0  </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>sc0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>1250.0 kBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>10.0.0.4 ()</TD></TR>
 </TABLE>
****************************************************************************
*********************


Thanks

Alan Rader
Finish Line, Inc.
Network Administrator
arader at finishline.com
317-899-1022 x3529


_________________________________________________________________________
This message and any attachments may be confidential or privileged and are
for the exclusive use of the intended recipient.  If you are not the
addressee or intended recipient, please do not read, copy, use, or disclose
this communication to others.  If you have received this in error, please
notify the sender by replying to this message, and then delete it entirely
from your system.  Delivery of this message and any attachments to any
person other than the intended recipient(s) is not intended in any way to
waive confidentiality or a privilege.  All personal messages express views
only of the sender, which are not to be attributed to Finish Line, and may
not be copied or distributed without this statement.

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list