[mrtg] Re: FW: help with monitoring PIX 520 CPU and Memory Us age

Ed Grant ed.grant at raremedium.net
Mon Nov 18 21:10:00 MET 2002


David,

You are correct.

1.3.6.1.4.1.9.9.48.1.1.1.5.1 is the OID for current amount of Memory in Use
1.3.6.1.4.1.9.9.48.1.1.1.6.1 is the OID for current amount of Memory Free

Ed

-----Original Message-----
From: McMullen, David E. (NGIT) [mailto:David.McMullen at mail.va.gov]
Sent: Monday, November 18, 2002 2:09 PM
To: 'Ed Grant'; 'Kerry Werry'; 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: FW: help with monitoring PIX 520 CPU and Memory Us
age



Can someone help me with a conceptual issue?  How do the following
parameters get mapped properly?

LegendI[pix_memory]: Memory Used
LegendO[pix_memory]: Memory Free

is 1.3.6.1.4.1.9.9.48.1.1.1.5.1  LegendI[pix_memory]: Memory Used
and 1.3.6.1.4.1.9.9.48.1.1.1.6.1 LegendO[pix_memory]: Memory Free

???

thanks for screwing in the lightbulb and showing me where the switch is
located.


dmac


-----Original Message-----
From: Ed Grant [mailto:ed.grant at raremedium.net]
Sent: Monday, November 18, 2002 11:46 AM
To: 'Kerry Werry'; 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: FW: help with monitoring PIX 520 CPU and Memory
Usage



Kerry,

I appreciate the help, so far this seems to work. Are you also monitoring
Memory usage? Below is the memory config that I am testing, and it does
create the graphs. Unfortunately there is no data in the graphs. I can query
the PIX using getif and snmputil using these OID's for Memory usage and get
the values that I am looking for. When I enter the OID's into MRTG though,
MRTG creates empty graphs? Any insight on this?

Target[pix_memory]:
1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.6.1:mycommunity at 0.0.0.
0:

Title[pix_memory]: Memory Utilization for -- pix
YLegend[pix_memory]: Memory
LegendI[pix_memory]: Memory Used
LegendO[pix_memory]: Memory Free
ShortLegend[pix_memory]: %
Options[pix_memory]: growright, gauge, integer, nopercent
MaxBytes[pix_memory]: 100
PageTop[pix_memory]: <H1>Memory Utilization for -- pix</H1> 

-----Original Message-----
From: Kerry Werry [mailto:KWerry at Pivotal.com]
Sent: Monday, November 18, 2002 11:01 AM
To: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] FW: help with monitoring PIX 520 CPU and Memory Usage





Kerry L. Werry MCSE CCNA
Pivotal Corporation



-----Original Message-----
From: Kerry Werry 
Sent: November 18, 2002 8:00 AM
To: 'Ed Grant'
Subject: RE: [mrtg] help with monitoring PIX 520 CPU and Memory Usage


Here is my config for PIX CPU

### PIX CPU Load (1 min & 5 min) report for x.x.x.x ###

Target[10.1.0.21_0_CPU1]:
1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:community at x.
x.x.x::2:2::1
Options[10.1.0.21_0_CPU1]: gauge,nopercent,growright,nobanner,integer
WithPeak[10.1.0.21_0_CPU1]: wmy
YLegend[10.1.0.21_0_CPU1]: Util(percent)
MaxBytes[10.1.0.21_0_CPU1]: 100
LegendI[10.1.0.21_0_CPU1]: CPU Usage (5 secs)
LegendO[10.1.0.21_0_CPU1]: CPU Usage (1 min)
Title[10.1.0.21_0_CPU1]: My PIX
Unscaled[10.1.0.21_0_CPU1]: dwmy
Legend1[10.1.0.21_0_CPU1]: CPU utilisation over 1 minute
Legend2[10.1.0.21_0_CPU1]: CPU utilisation over 5 minute
Legend3[10.1.0.21_0_CPU1]: Maximal CPU utilisation over 1 minute
Legend4[10.1.0.21_0_CPU1]: Maximal CPU utilisation over 5 minute
ShortLegend[10.1.0.21_0_CPU1]: %
PageTop[10.1.0.21_0_CPU1]: <table width="100%" border="0">
 <tr>
  <td><h2>Cisco CPU Utilisation Report</h2></td>
 </tr>
 <tr>
  <td><h3>PIX CPU</h3></td>
 </tr>
 <tr>
  <td><p>PIX : x.x.x.x</p></td>
 </tr>
 </table>

Kerry L. Werry MCSE CCNA
Pivotal Corporation



-----Original Message-----
From: Ed Grant [mailto:ed.grant at raremedium.net] 
Sent: November 18, 2002 7:35 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] help with monitoring PIX 520 CPU and Memory Usage



Hello All,

I am trying to monitor CPU and Memory usage on my PIX 520 with 3
interfaces(internal, external, dmz) and running PIX version 6.2(2). I have
gone through the archives and found some OID's for the PIX but they didn't
work for me? I am able to monitor the three interfaces on my PIX just fine,
but when I try to configure CPU and Memory monitoring, I can't seem to get
the correct OID string.

Here is what I added to my cfg file for Memory usage. A graph was created
with these OID's(unlike before with the incorrect OID's), but there is no
data in the graph, it just says 0 and has been running for days. If I use
getif, I am able to query the PIX and return the current memory in use and
current memory free, using the OID's that I used in my cfg file. So I know
that I have the correct OID's for Memory usage, but MRTG is for some reason
not graphing the data? (for this email i spaced between line wraps)
Target[pix_memory]:
1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.6.1:mycommunity at 0.0.0.
0:

Title[pix_memory]: Memory Utilization for -- pix
YLegend[pix_memory]: Memory
LegendI[pix_memory]: Memory Used
LegendO[pix_memory]: Memory Free
ShortLegend[pix_memory]: %
Options[pix_memory]: growright, gauge, integer, nopercent
MaxBytes[pix_memory]: 100
PageTop[pix_memory]: <H1>Memory Utilization for -- pix</H1>


According to the "reference.html" doc, I can specify my own OID values to
monitor a object, but need two values. I came across this post for the CPU
monitoring, but it only had the one OID value and did not work for me.
http://www.ee.ethz.ch/~slist/mrtg/msg20755.html
Cisco-Process-MIB:cpmCPUTotal5min.1 1.3.6.1.4.1.9.9.109.1.1.1.1.5.1

I read up on Cisco's SNMP implementation on the PIX here:
http://www.cisco.com/warp/public/110/pixsnmp.html

Can someone shed some light on this for me?   TIA

Ed Grant  |  Director of Information Technology
rare Medium Atlanta, LLC.
ed.grant at raremedium.net
(w) 770-576-4397  |  (f) 770-576-4200

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list