[mrtg] Re: Windows 2000 CPU numbering

Syed Ali syed at nec-labs.com
Wed Feb 19 20:12:38 MET 2003



I will try the www.net-snmp.org mib for Windows.

Thank you...


-----Original Message-----
From: Jerry Heidtke [mailto:jheidtke at fmlh.edu] 
Sent: Wednesday, February 19, 2003 1:59 PM
To: Syed Ali; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] Windows 2000 CPU numbering


This happens because Microsoft is incapable of understanding or
following
industry standards.

Same thing happens with instances of network interfaces, storage
devices,
etc.

If you need to monitor performance items on Windows servers reliably and
consistantly, you cannot rely on any mib that Microsoft has written, or
any
standard mib that Microsoft has implemented. If your hardware vendor has
supplied agents with their own mibs, use those. Otherwise use external
scripts to access perfmon or wmi stats. If neither of these are an
option,
you're out of luck.

Jerry

-----Original Message-----
From: Syed Ali [mailto:syed at nec-labs.com] 
Sent: Wednesday, February 19, 2003 12:00 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Windows 2000 CPU numbering



Hello,

Is the CPU numbering different on different Windows 2000 dual
processors machines? For example, on first host:

(Iso.org.dod.internet.mgmt.mib-2)
#snmpwalk -OT 1stwindows2000host .1.3.6.1.2.1.25.3.3
[snip]
host.hrDevice.hrProcessorTable.hrProcessorEntry.hrProcessorLoad.1 = 0
host.hrDevice.hrProcessorTable.hrProcessorEntry.hrProcessorLoad.2 = 0

On second host:

#snmpwalk -OT 2ndwindows2000host .1.3.6.1.2.1.25.3.3.1
[snip]
host.hrDevice.hrProcessorTable.hrProcessorEntry.hrProcessorLoad.2 = 0
host.hrDevice.hrProcessorTable.hrProcessorEntry.hrProcessorLoad.3 = 0

Why are the CPU numbered 0,1 on the 1st host and 2,3 on the 2nd host
when both have only 2 processors and are capable of having at most 2
processors?

I am trying to get the load from dual processor Windows boxes and the
above behavior is causing problems because on some boxes I have to
query 0,1 and and some I have to query 2,3. I wish the index started
uniformely at 0...

Thank you



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


Confidentiality Notice: This e-mail message, including any attachments,
is 
for the sole use of the intended recipient(s) and may contain
confidential 
and privileged information.  Any unauthorized review, use, disclosure or

distribution is prohibited.  If you are not the intended recipient,
please 
contact the sender by reply e-mail and destroy all copies of the
original 
message.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list