This will configure MRTG_Bundle for your system. New Features of MRTG_Bundle 2.0.1 1) Added a Update_MyRouters tools to update MRTG with new routers and switches. 2) Changed the port that Apache runs on from 8080 to 9191 3) RRDtool database instead of using flat files. 4) Routers2.cgi interface instead of the flat graphs. 5) One minute check intervals. 6) Automatic configuration of CPU(s), Hard Disk, and memory for the localhost. 7) Installation of SNMP4W2K for better Windows monitoring. 8) Elimination of the MRTG service. 8) Cron now runs MRTG once a minute for each config file. 9) Unix Shell Script installer. (Hey, I'm a *nix guy) 10) Add routers and switches during the install. Don't forget to update the c:\mrtg\mrtg\bin\myrouters.txt file. 11) Changed to Apache 1.3 from 2.0. (Not as big as 2.0) Please note, that this installation script it case sensitive. Type all your input in lower case. Press Enter to continue... Make sure you have SNMP installed on this local machine if you want to monitor bandwidth, cpu, hard disk and memory usage in your MRTG graphs. Please note, due to the fact that Microsoft has supplied a crippled implimenation of SNMP, it will be necessary to install a program called SNMP4W2K in order to monitor this local machine. If you choose to proceed then this, then the installer will start the setup program of SNMP4W2k for you. Do you want to monitor this machine and install SNMP4W2K? (y/n) --> y Please note, Microsoft enabled spinlocks incorrectly on SMP machines which will cause the 2nd CPU's SNMP information to not be totally accurate. Microsoft has stated that they will not fix this. I think the real reason behind this is that they want you to buy their expensive monitoring tools. Does this computer have 1 or 2 CPUs Enter (1/2) --> 1 Starting the install of SNMP4W2K. Press enter when the install of SNMP4W2K is complete. MRTG_Bundle v2.0 now supports adding external routers and switches. Just edit the file called "c:\mrtg\mrtg\bin\myrouters.txt" and add the community string and router to each line of the file. Example myrouters.txt: public@localhost public@router1 secretcommunitystring@switch1 etc. Have you prepared a myrouters.txt file? (y/n) --> y Here is all the information that I have gathered before I proceed: --> You have installed SNMP on this local machine so it can be added to MRTG. --> You have 1 processors. --> You have prepared a "c:\mrtg\mrtg\bin\myrouters.txt" file Do you wish to continue with these options? (y/n) --> y c:\mrtg\shellscript.sh: no matches found: /mrtg/mrtg/bin/*.cfg [128] --base: Get Device Info on public@localhost: --base: Vendor Id: --base: Populating confcache --snpo: confcache public@localhost: Descr MS TCP Loopback interface --> 1 --snpo: confcache public@localhost: Descr Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport --> 2 --snpo: confcache public@localhost: Ip 127.0.0.1 --> 1 --snpo: confcache public@localhost: Ip 192.168.213.215 --> 2 --snpo: confcache public@localhost: Type 24 --> 1 --snpo: confcache public@localhost: Type 6 --> 2 --snpo: confcache public@localhost: Eth --> 1 --snpo: confcache public@localhost: Eth 00-01-80-0a-4c-fb --> 2 --base: Get Interface Info --base: Walking ifIndex --base: Walking ifType --base: Walking ifAdminStatus --base: Walking ifOperStatus --base: Walking ifSpeed --base: Get Device Info on Public@192.168.200.10: SNMP Error: no response received SNMPv1_Session (remote host: "192.168.200.10" [192.168.200.10].161) community: "Public" request ID: 1948300615 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570 SNMPWALK Problem for 1.3.6.1.2.1.1 on Public@192.168.200.10: at c:/mrtg/mrtg/bin/cfgmaker line 689 --base: Get Device Info on Public@192.168.201.10: SNMP Error: no response received SNMPv1_Session (remote host: "192.168.201.10" [192.168.201.10].161) community: "Public" request ID: -1554740905 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570 SNMPWALK Problem for 1.3.6.1.2.1.1 on Public@192.168.201.10: at c:/mrtg/mrtg/bin/cfgmaker line 689 --base: Get Device Info on Public@192.168.202.10: SNMP Error: no response received SNMPv1_Session (remote host: "192.168.202.10" [192.168.202.10].161) community: "Public" request ID: 1984730853 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570 SNMPWALK Problem for 1.3.6.1.2.1.1 on Public@192.168.202.10: at c:/mrtg/mrtg/bin/cfgmaker line 689 --base: Get Device Info on Public@192.168.203.10: SNMP Error: no response received SNMPv1_Session (remote host: "192.168.203.10" [192.168.203.10].161) community: "Public" request ID: -1728968507 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570 SNMPWALK Problem for 1.3.6.1.2.1.1 on Public@192.168.203.10: at c:/mrtg/mrtg/bin/cfgmaker line 689 --base: Get Device Info on Public@192.168.204.10: SNMP Error: no response received SNMPv1_Session (remote host: "192.168.204.10" [192.168.204.10].161) community: "Public" request ID: -1566811615 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at c:/mrtg/mrtg/bin\..\lib\mrtg2/SNMP_util.pm line 570 SNMPWALK Problem for 1.3.6.1.2.1.1 on Public@192.168.204.10: at c:/mrtg/mrtg/bin/cfgmaker line 689 --base: Get Device Info on Public@192.168.205.10: