<HTML><HEAD>
<META content="text/html; charset=utf-8" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 11.00.9600.17690"></HEAD>
<BODY style="FONT: 10pt Segoe UI; MARGIN: 4px 4px 1px">
<DIV>I changed the MaxBytes to 19660800 and that gets me to ~150MB. 12500000 was a little short....I used 1024 notation instead, that seem right? I did notice that the graph only went to 120 so I made the change for the counters this AM as the device does support SNMP V2. Thanks everyone for everything so far, this has really helped out a lot.</DIV>
<DIV> </DIV>
<DIV>John<BR><BR>>>> "Darren Shea" <dshea@ecpi.com> 4/16/2015 5:56 PM >>><BR>John,<BR> No one else seems to have mentioned this (although Gregory Volk's code<BR>did have it set correctly), but are you using the v2 counters? The v1<BR>counters max out around 124 Mbps, not 100, but if the device supports SNMP<BR>v2c, you'll need to use the larger counters anyway, so if your .cfg file has<BR>a target like this:<BR><BR>Target[myswitch_FastEthernet1]: \FastEthernet1:public@myswitch:<BR><BR>You'll want to make sure there are 5 colons, followed by a two at the end,<BR>like so:<BR><BR>Target[myswitch_FastEthernet1]: \FastEthernet1:public@myswitch:::::2<BR><BR>-- Darren<BR><BR>-----Original Message-----<BR>Date: Thu, 16 Apr 2015 12:41:03 -0400<BR>From: "John Shipley" <jshipley@edutech.org><BR>To: <mrtg@lists.oetiker.ch><BR>Subject: [mrtg] Traffic Analysis graph Zeroing out<BR>Message-ID: <552FADDF020000F7000A1D81@gwia.edutech.org><BR>Content-Type: text/plain; charset="us-ascii"<BR><BR>First off Greetings to all! I have recently been placed in charge of the<BR>MRTG system we have and I have no experience with this. In fact the only<BR>person on this team that did, retired recently. I was brought into this<BR>group from another group, so I am kind of in a pickle.<BR><BR>With that little story here is what is happening. We have graphs that track<BR>how much bandwidth a customer is using. We have one customer who<BR>periodically uses a lot of bandwidth so we bumped their bandwidth up to<BR>150MB from 100. The issue is that the graphs were originally set to monitor<BR>up to 100MB. When this customer goes over 100MB, the graph bottoms out to<BR>0. I attached the graph. the area circled in red is where they went over<BR>100.<BR><BR>I have spent days trying to figure out how to increase that graph's Y axis<BR>to 150 or 200M but I can't seem to figure it out. Any suggestions would be<BR>very much appreciated.<BR><BR>Thanks,<BR><BR>John<BR><BR>_______________________________________________<BR>mrtg mailing list<BR>mrtg@lists.oetiker.ch<BR><A href="https://lists.oetiker.ch/cgi-bin/listinfo/mrtg">https://lists.oetiker.ch/cgi-bin/listinfo/mrtg</A><BR></DIV></BODY></HTML>