[smokeping-users] Graph but no results
Tony DeMatteis
tonyd at commspeed.net
Fri Oct 4 16:12:16 CEST 2013
I meant to include my Probe definition.
+TelnetIOSPing
forks = 5
offset = 50%
packetsize = 56
step = 300
timeout = 10
iospass = <censored>
iosuser = smokeping
pings = 20
> Hello,
>
> Maybe someone could provide me with some assistance. I have a
> host/Target graph that get's created and populates the web page.
> However, no results appear on the graph. I am using the TelnetIOSPing
> probe. I have a number of other hosts/Targets that are using this
> probe. I have kicked out some debug results from
> /usr/share/perl5/Smokeping/probes/TelnetIOSPing.pm and the host is
> reachable and I see ping results, but they don't make it into the
> graph. In addition, no errors related to said host, are showing in the
> smokeping.log. Any ideas?
>
> Thank you!
>
>
> open(OUTF,">>/tmp/TelnetIOSPing.debug") || die "Can't open OUTF: $!";
> print OUTF "target => $dest\nsource => $source\nuser => $login\n";
>
> my $ok = $telnet->open(Host => $source,
> Port => $port);
>
> print OUTF "\n";
> print OUTF "===========================\n";
> print OUTF "Connection to $source $ok\n";
> print OUTF "\n";
>
> #---- Code that does the log in and executes extended ping
>
> $telnet->prompt('/[\@\w\-\.]+[>#][ ]*$/');
> @output = $telnet->cmd("n");
>
> #$telnet->waitfor('/[\@\w\-\.]+[>#][ ]*$/');
> $telnet->print("quit");
> $telnet->close;
>
> print OUTF "closed Telnet connection\n";
>
> my @times = ();
> while (@output) {
> my $outputline = shift @output;
> chomp($outputline);
> print OUTF "$outputline\n";
> $outputline =~ /^Reply to request \d+ \((\d+) ms\)/ && push(@times,$1);
> print OUTF "$outputline => $1\n";
> }
>
>
> <<< I see data in graph from this Target >>>
>
> +++ pvdc_to_mesa_rtr
> menu = Core to eSedo MESA RTR
> title = Core Router to eSedo MESA RTR
> probe = TelnetIOSPing
> host = <censored>
> source = <censored>
>
>
> ===========================
> Connection to <censored> 1
>
> closed Telnet connection
> Type escape sequence to abort.
> Type escape sequence to abort. =>
> Sending 20, 56-byte ICMP Echos to <censored>, timeout is 2 seconds:
> Sending 20, 56-byte ICMP Echos to <censored>, timeout is 2 seconds: =>
> Reply to request 0 (1 ms)
> Reply to request 0 (1 ms) => 1
> Reply to request 1 (4 ms)
> Reply to request 1 (4 ms) => 4
> Reply to request 2 (1 ms)
> Reply to request 2 (1 ms) => 1
> Reply to request 3 (1 ms)
> Reply to request 3 (1 ms) => 1
> Reply to request 4 (1 ms)
> Reply to request 4 (1 ms) => 1
> Reply to request 5 (1 ms)
> Reply to request 5 (1 ms) => 1
> Reply to request 6 (1 ms)
> Reply to request 6 (1 ms) => 1
> Reply to request 7 (1 ms)
> Reply to request 7 (1 ms) => 1
> Reply to request 8 (4 ms)
> Reply to request 8 (4 ms) => 4
> Reply to request 9 (1 ms)
> Reply to request 9 (1 ms) => 1
> Reply to request 10 (1 ms)
> Reply to request 10 (1 ms) => 1
> Reply to request 11 (1 ms)
> Reply to request 11 (1 ms) => 1
> Reply to request 12 (1 ms)
> Reply to request 12 (1 ms) => 1
> Reply to request 13 (1 ms)
> Reply to request 13 (1 ms) => 1
> Reply to request 14 (1 ms)
> Reply to request 14 (1 ms) => 1
> Reply to request 15 (1 ms)
> Reply to request 15 (1 ms) => 1
> Reply to request 16 (1 ms)
> Reply to request 16 (1 ms) => 1
> Reply to request 17 (1 ms)
> Reply to request 17 (1 ms) => 1
> Reply to request 18 (1 ms)
> Reply to request 18 (1 ms) => 1
> Reply to request 19 (4 ms)
> Reply to request 19 (4 ms) => 4
> Success rate is 100 percent (20/20), round-trip min/avg/max = 1/1/4 ms
> Success rate is 100 percent (20/20), round-trip min/avg/max = 1/1/4 ms => 4
> target => <censored>
> source => <censored>
> user => smokeping
>
>
>
>
> <<< I DO NOT see data in graph from this Target >>>
>
> +++ esedo_to_mesa_rtr
> menu = esedo Core to eSedo MESA
> title = eSedo Core Router to eSedo MESA RTR
> probe = TelnetIOSPing
> host = <censored>
> source = <censored>
>
>
> ===========================
> Connection to <censored> 1
>
> closed Telnet connection
> Type escape sequence to abort.
> Type escape sequence to abort. =>
> Sending 20, 56-byte ICMP Echos to <censored>, timeout is 2 seconds:
> Sending 20, 56-byte ICMP Echos to <censored>, timeout is 2 seconds: =>
> Reply to request 0 (60 ms)
> Reply to request 0 (60 ms) => 60
> Reply to request 1 (52 ms)
> Reply to request 1 (52 ms) => 52
> Reply to request 2 (24 ms)
> Reply to request 2 (24 ms) => 24
> Reply to request 3 (64 ms)
> Reply to request 3 (64 ms) => 64
> Reply to request 4 (56 ms)
> Reply to request 4 (56 ms) => 56
> Reply to request 5 (40 ms)
> Reply to request 5 (40 ms) => 40
> Reply to request 6 (44 ms)
> Reply to request 6 (44 ms) => 44
> Reply to request 7 (60 ms)
> Reply to request 7 (60 ms) => 60
> Reply to request 8 (40 ms)
> Reply to request 8 (40 ms) => 40
> Reply to request 9 (36 ms)
> Reply to request 9 (36 ms) => 36
> Reply to request 10 (20 ms)
> Reply to request 10 (20 ms) => 20
> Reply to request 11 (20 ms)
> Reply to request 11 (20 ms) => 20
> Reply to request 12 (28 ms)
> Reply to request 12 (28 ms) => 28
> Reply to request 13 (28 ms)
> Reply to request 13 (28 ms) => 28
> Reply to request 14 (36 ms)
> Reply to request 14 (36 ms) => 36
> Reply to request 15 (20 ms)
> Reply to request 15 (20 ms) => 20
> Reply to request 16 (20 ms)
> Reply to request 16 (20 ms) => 20
> Reply to request 17 (8 ms)
> Reply to request 17 (8 ms) => 8
> Reply to request 18 (20 ms)
> Reply to request 18 (20 ms) => 20
> Reply to request 19 (44 ms)
> Reply to request 19 (44 ms) => 44
> Success rate is 100 percent (20/20), round-trip min/avg/max = 8/36/64 ms
> Success rate is 100 percent (20/20), round-trip min/avg/max = 8/36/64 ms => 44
> target => <censored>
> source => <censored>
> user => smokeping
>
>
>
> _______________________________________________
> smokeping-users mailing list
> smokeping-users at lists.oetiker.ch
> https://lists.oetiker.ch/cgi-bin/listinfo/smokeping-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.oetiker.ch/pipermail/smokeping-users/attachments/20131004/07b718e7/attachment.htm
More information about the smokeping-users
mailing list