[mrtg] Re:

[Simon Thorpe]

Guillermo

Your target public at 148.233.24.113 doesn't seem to have an SNMP agent
running, therefore it
cannot retrieve any values.

Before running the cfgmaker, try a test with snmpwalk, something like...

snmpwalk 148.233.24.113 public ip

would return all the vars in the ip mib.

Simon

> -----Original Message-----
> From:	Guillermo Krawiec [SMTP:gkrawiec at miktek.com]
> Sent:	22 July 1999 01:51
> To:	mrtg at list.ee.ethz.ch
> Subject:	[mrtg] 
> 
> Hi, I am trying to follow the Windows NT MRTG guide for dummies (thanks
> David)
> but when I get to the part where I type
> perl c:\mrtg-2.8.3\cfgmaker public at 148.233.24.113 > mrtg.cfg
> on the cmd prompt
> I get the following error
> ---------------------------------
> C:\MRTG-2~1.3>perl c:\mrtg-2.8.3\cfgmaker public at 148.233.24.113 > mrtg.cfg
> SNMP Error:
> no response received
> SNMPv1_Session (remote host: "148.233.24.113" [148.233.24.113].161
>                   community: "public"
>                  request ID: 1754947341
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
> SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber
> sysObjectID on public at 148.233.24.113
> SNMP Error:
> no response received
> SNMPv1_Session (remote host: "148.233.24.113" [148.233.24.113].161
>                   community: "public"
>                  request ID: 2064780561
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
> SNMP Error:
> no response received
> SNMPv1_Session (remote host: "148.233.24.113" [148.233.24.113].161
>                   community: "public"
>                  request ID: 2064780562
>                 PDU bufsize: 8000 bytes
>                     timeout: 2s
>                     retries: 5
>                     backoff: 1)
> 
> C:\MRTG-2~1.3>
> --------------------------------------------------------------------------
> ------------------------
>  
> Any idea what it is I could be doing wrong?
> public is the name of my community, and 148.233.24.113 is the address of
> my cisco 1602 router.
> what else should I check? I really don't know what port to look into (if
> that is the problem)...I
> just want the input and output statistics...
> thanks,
> -Guillermo

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg