[mrtg] Re: NT disk graphing woes

[David C Prall]

>From my config file for one of my servers I have the following for
Drives C, D, and E. C and D are on the same physical drive, E is on a
second physical drive. All use the same OID start of
1.3.6.1.4.1.311.1.1.3.1.1.6.1.3.6.

C continues with 48.58.48.58.67.58
D continues with 48.58.48.58.68.58
E continues with 49.58.49.58.69.58

Here we can deduce that the first and third define the physical device,
the second, fourth, and sixth define the controller, the fifth defines
the drive letter. At least from my system that is what I see. I used
getif to find these OIDS. On an NT box with the reskit you can use
snmputil walk 10.15.1.23 public .1.3.6.1.4.1.311.1.1.3.1.1.6.1.3.6 (or
something along those lines)

# ----- 10.15.1.23 C Drive -----

Target[10.15.1.23-C]:
1.3.6.1.4.1.311.1.1.3.1.1.6.1.3.6.48.58.48.58.67.58&1.3.6.1.4.1.311.1.1.
3.1.1.6.1.3.6.48.58.48.58.67.58:public at 10.15.1.23
MaxBytes[10.15.1.23-C]: 4001
LegendO[10.15.1.23-C]:
Title[10.15.1.23-C]: 10.15.1.23 C Drive available Disk Space
PageTop[10.15.1.23-C]: <H1>Available Disk Space on 10.15.1.23 C Drive
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>10.15.1.23</TD></TR>
  </TABLE>

# ----- 10.15.1.23 D Drive -----

Target[10.15.1.23-D]:
1.3.6.1.4.1.311.1.1.3.1.1.6.1.3.6.48.58.48.58.68.58&1.3.6.1.4.1.311.1.1.
3.1.1.6.1.3.6.48.58.48.58.68.58:public at 10.15.1.23
MaxBytes[10.15.1.23-D]: 4550
LegendO[10.15.1.23-D]:
Title[10.15.1.23-D]: 10.15.1.23 D Drive available Disk Space
PageTop[10.15.1.23-D]: <H1>Available Disk Space on 10.15.1.23 D Drive
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>10.15.1.23</TD></TR>
  </TABLE>

# ----- 10.15.1.23 E Drive -----

Target[10.15.1.23-E]:
1.3.6.1.4.1.311.1.1.3.1.1.6.1.3.6.49.58.49.58.69.58&1.3.6.1.4.1.311.1.1.
3.1.1.6.1.3.6.49.58.49.58.69.58:public at 10.15.1.23
MaxBytes[10.15.1.23-E]: 34554
LegendO[10.15.1.23-E]:
Title[10.15.1.23-E]: 10.15.1.23 E Drive available Disk Space
PageTop[10.15.1.23-E]: <H1>Available Disk Space on 10.15.1.23 E Drive
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>10.15.1.23</TD></TR>
  </TABLE>

Hope this helps,

David C Prall, MCSE MCNE                                            DCP
Technologies
dcp at dcptech.com
Alexandria, VA
dcppage at dcptech.com
http://www.dcptech.com
----- Original Message -----
From: <benjamin.cobb at fnc.fujitsu.com>
To: <mrtg at list.ee.ethz.ch>
Sent: Wednesday, August 04, 1999 6:14 PM
Subject: [mrtg] NT disk graphing woes


> If .1.3.6.1.4.1.311.1.1.3.1.1.6.1.3 will return instance 1 (drive C:)
> then what returns drive D:?
> I have walked the tree and am using
1.3.6.1.4.1.311.1.1.3.1.1.6.1.1.6.4
> 9.58.49.58.68.58 for Drive D: yet I get a reply of 1mb free (which is
> not correct). Any ideas?
>
> Benjamin Cobb
>
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>
>

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg