[mrtg] Re: Monitoring 3810 ports ?

[ccsmrh=list-apps/net/mrtg at bath.ac.uk]

--------

The sec100, 8-port UTP (segment) modules, use:

  OID     sec100TxByteCount       1.3.6.1.4.1.326.2.3.3.9.1.1
  OID     sec100RxByteCount       1.3.6.1.4.1.326.2.3.3.9.1.11

The sec10, 24-port UTP (device) modules, use:

  OID     sec10TxByteCount       1.3.6.1.4.1.326.2.3.2.9.1.1
  OID     sec10RxByteCount       1.3.6.1.4.1.326.2.3.2.9.1.11

For other OIDs look at:

  ftp://ftp.fore.com/pub/snmp/mibs/foreview/fv43_ft51/fore-sec10.mib
  ftp://ftp.fore.com/pub/snmp/mibs/foreview/fv43_ft51/fore-sec100.mib

Cheers,
 Mark.

On 5 August 1999 at 10:45, Clint Alexander <Clint.Alexander at corp.ptd.net> wrote:
> 
> I'm attempting to configure one 3810 as well as one linkswitches 3300
> into MRTG.
> 
> Can MRTG monitor utilization on all the ports on a 3810?
> I'm sure it could, but can it start monitoring
> in its 'out of the box' state, or do I have to
> add OID's to it?
> If so, does anyone know the OID's to a 3810?
> 
> 
> 
> ------------------------------------------- 
> Clint Alexander 
> clinta at corp.ptd.net 
> PenTeleData Engineering Dept. 
> 
> [- Over-Estimate everything, and nothing will surprise you -] 
> 
>  -HV 
> 
> 
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 


--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg