[mrtg] MRTG-Ping-Probe

[Graziosi, Chris]

When I run MRTG-PING-PROBE through MRTG I am only getting 0 0 in the Log

Here is the top 2 lines of the Log

935607624 0 0
935607624 0 0 0 0

I am also getting this error when I run it manually...


C:\mrtg-2.8.6\pingprobe>perl mrtg-ping-probe localhost
mrtg-ping-probe: ERROR: Could not find ping summary for localhost
mrtg-ping-probe: INFO: The output of the ping command ping -l 56 -n 10
localhost
 was:

Pinging machine.domain.com [127.0.0.1] with 56 bytes of data:

Reply from 127.0.0.1: bytes=56 time<10ms TTL=128
Reply from 127.0.0.1: bytes=56 time<10ms TTL=128
Reply from 127.0.0.1: bytes=56 time<10ms TTL=128
Reply from 127.0.0.1: bytes=56 time<10ms TTL=128
Reply from 127.0.0.1: bytes=56 time<10ms TTL=128
Reply from 127.0.0.1: bytes=56 time<10ms TTL=128
Reply from 127.0.0.1: bytes=56 time<10ms TTL=128
Reply from 127.0.0.1: bytes=56 time<10ms TTL=128
Reply from 127.0.0.1: bytes=56 time<10ms TTL=128
Reply from 127.0.0.1: bytes=56 time<10ms TTL=128

0
0

I can not seem to find where it puts the ping summary.

Any help would be very much appreciated.

Thanks
Chris

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg