[mrtg] Re: Cisco or aggregating

[Ted Mektrakarn]

configure the cisco 675 to do SNMP

you need to be enabled ... an in configure terminal

Router#conf t
Router(config)#snmp-server ?
  access-policy        Define an SNMPv2 access policy (acl)
  chassis-id           String to uniquely identify this chassis
  community            Enable SNMP; set community string and access privs
  contact              Text for mib object sysContact
  context              Define an SNMPv2 context
  enable               Enable SNMP Traps or Informs
  host                 Specify hosts to receive SNMP TRAPs
  location             Text for mib object sysLocation
  packetsize           Largest SNMP packet size
  party                Define an SNMPv2 party
  queue-length         Message queue length for each TRAP host
  system-shutdown      Enable use of the SNMP reload command
  tftp-server-list     Limit TFTP servers used via SNMP
  trap-authentication  Send TRAP messages on receipt of incorrect
community
                       string
  trap-source          Assign an interface for the source address of all
traps
  trap-timeout         Set timeout for TRAP message retransmissions
  view                 Define an SNMPv2 MIB view



you would need to set a community string, contact , location an etc..

Hope that helps,

-Ted Mektrakarn

<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Ted Mektrakarn, 				 ted at MP3.COM
Systems and Network Engineer
MP3.com, Inc. - The 21st Century Music Company   http://www.mp3.com
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>

On Sat, 28 Aug 1999, Chairman of the Bored wrote:

> 
> Greetings, I'm new here, so don't kill me if I screw up :)
> 
> 
> I have a customer that I handle web development for that
> has a pretty hefty dsl feed they want to monitor with mrtg.
> 
> the router is a cisco 675. does anyone know how to
> monitor one of these?
> 
> alternatively, does someone have step by step instructions on how to take
> the log files from 8 terminal servers and add them all together and display
> them as you would a single one?
> 
> thanks,
> -dd
> 
> 
> 
>                                 \\\\\//                                    
>        \\|//       _\\|//_      |     |      _\\|//_       \\|//           
>        (@ @)      (' 0-0 ')     (.) (.)     (' @-@ ')      (o-o)           
> +-=oOOo-(_)-oOOo=oo0=(_)=0oo=oOO=-(_)-=OOo=oo0=(_)=0oo=oOOo-(_)-oOOo=-+    
> 	       Plazma Networking Services / Level Seven inc.                
> 			    Connecting the World....                          
> 	 http://www.plazma.net http://www.L7.net http://www.L7.org         /"\
>     Olympia's "one stop" InterNetworking Provider 1 (360) 357 - 7315    \ /
> +-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-+  X 
> ASCII Ribbon campaign against HTML E-Mail >- - - - - - - - - - - - - -> / \
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg