[mrtg] Re: Trouble graphing CPU & MEM load on a 3COM Netbuilder-II

[Olivier Lemaire]

Hi all !

David C Prall a écrit :

> What happens when you do an snmpwalk on the OID's.

nothing is reported. I tried snmpwalk my-rooter-ip public 1. and I got a
<long> list of OIDs apparently supported. When I looked for the OIDS you
gave me, I didn't find it... (nor the MEMs ones...)

>
>
> Do you need a .0 at the end for the speciic instance. I'll try it on my
> routers when I get into work in the morning.

I tried too for the same results....

>
>
> David C Prall, MCNE MCSE          DCP Technologies
> dcp at dcptech.com                       http://www.dcptech.com
> dcppage at dcptech.com
> ----- Original Message -----
> From: Olivier Lemaire <sholari at free.fr>
> To: David C Prall <dcp at dcptech.com>
> Sent: Sunday, August 29, 1999 3:00 PM
> Subject: Re: [mrtg] Re: Trouble graphing CPU & MEM load on a 3COM
> Netbuilder-II
>
> > Hi David
> >     and thanks you for your help ;-)
> >
> > David C Prall a écrit :
> >
> > > >
> Target[my-router-IP.cpu]:1.3.6.1.4.1.43.2.13.8.4:public at my-router-IP
> > > You need to OID's one for IN and one for OUT. I'd do the smae on for
> > > both since you are only interested in graphing the current CPU load.
> > >
> > >
> Target[my-router-IP.cpu]:1.3.6.1.4.1.43.2.13.8.4&1.3.6.1.4.1.43.2.13.8.4
> > > :public at my-router-IP
> >
> > I tried, but always the same error message....(I tried the private
> community
> > too, for same result...)
> >
> > >
> > >
> > > For memory, you can graph total MEM on both Free and Used graphs as
> the
> > > OUT variable giving you target lines like these:
> > >
> > > Target[freemem]:
> > >
> 1.3.6.1.4.1.43.2.33.1.2.2&1.3.6.1.4.1.43.2.33.1.2.1:public at my-router-IP
> > > Target[usedmem]:
> > >
> 1.3.6.1.4.1.43.2.33.1.2.3&1.3.6.1.4.1.43.2.33.1.2.1:public at my-router-IP
> > >
> > > Although I would probably only graph the Used Memory so I didn't get
> > > confused, plus now I have a mark at total memory.
> >
> > Same result as above...
> >
> > >
> > >
> > > David C Prall, MCNE MCSE          DCP Technologies
> > > dcp at dcptech.com                       http://www.dcptech.com
> > > dcppage at dcptech.com
> > >
> > > --
> > > * To unsubscribe from the mrtg mailing list, send a message with the
> > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> >
> > --
> >    Olivier LEMAIRE
> > http://sholari.online.fr/
> >
> >
> >

--
   Olivier LEMAIRE
http://sholari.online.fr/


--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg