[mrtg] Re: help w/Win NT 4 SNMP

Jon Robbins jono at coloradosat.com
Tue Jul 13 17:35:42 MEST 1999


I now even have SP5, was SP4.  I've had resource kit as well.	

This is what I get from snmputil:
D:\>snmputil get 199.117.13.130 public .1.3.6.1.2.1.1.4.0
Error: errorStatus=2, errorIndex=1

And this is my SNMP tab:



Hopefully, this might shed some light then to someone..

Thanks, Jono
-----Original Message-----
From:	Stieers, Ken [mailto:KStieers at DainRauscher.com]
Sent:	Tuesday, July 13, 1999 6:04 AM
To:	'Jon Robbins'; 'mrtg-l'
Subject:	[mrtg] Re: help w/Win NT 4 SNMP

Jon, 

As Joey mentioned, make sure you've re-applied the service pack.  Make sure
that you have set a communtiy with read rights and that your server will
either accept SNMP packets from any host, or your MRTG machine is in the
list of hosts that it will accept SNMP packets from. 

If you have the NT Resource Kit (you're going to need it, so get if you
don't) you should now be able to run 

SNMPUTIL Get <host> <community> .1.3.6.1.2.1.1.4.0

and get the contact name as a result. 

Go to ftp.shellserv.com, get PERFM.ZIP, and follow the directions in it.
This will enable you to get statistics on the MS services running on the
server. 

Get GetIF from http://www.geocities.com/SiliconValley/Hills/8260/    Install
it and copy the PERFMIB.MIB file from the PERFM.ZIP collection into the
Getif/MIBs directory and delete the .INDEX file from the GetIF/MIBS
directory. 

Run get if, go to the MBrowser tab and go down the tree following this path:

	
iso.org.dod.internet.private.enterprises.microsoft.software.systems.os.winnt
.performance


Here you will find all of the objects/variables you can monitor on the NT
box that are NT specific.  Note that often in order to get the monitoring to
work properly, you have to add a .0 (the instance number) on the end of the
OID. 


HTH, 

Ken 


> -----Original Message-----
> From: Jon Robbins [mailto:jono at coloradosat.com]
> Sent: Monday, July 12, 1999 3:35 PM
> To: 'mrtg at list.ee.ethz.ch'
> Subject: [mrtg] help w/Win NT 4 SNMP
> 
> 
> Note: just subscribe to list server..
> 
> I have successfully setup MRTG 2.6.2 to monitor 2 different 
> Cisco routers,
> but I need help getting setup to monitor SNMP on a win NT 4 
> webserver.  I am
> sure the problems are w/ the SNMP setup on the machine, as I 
> cannot even
> monitor the contact and location that is plainly configured 
> in the SNMP
> services tab in Network settings.  But if there is a MRTG 
> user guru out
> there that knows MRTG on Windows NT 4, I would greatly 
> appreciate some help.
> 
> Thanks,
> Jon Robbins
> MIS Director
> 
> 
> Thank you,
> 
> Jon B. Robbins
> MIS Director
> Jono at coloradosat.com
> Colorado Satellite Broadcasting
> 303-786-8700 Extension 110
> 303-938-8388 Facsimile
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg


More information about the mrtg mailing list