[mrtg]

[Guillermo Krawiec]

Hi, I am trying to follow the Windows NT MRTG guide for dummies (thanks David)
but when I get to the part where I type
perl c:\mrtg-2.8.3\cfgmaker public at 148.233.24.113 > mrtg.cfg
on the cmd prompt
I get the following error
---------------------------------
C:\MRTG-2~1.3>perl c:\mrtg-2.8.3\cfgmaker public at 148.233.24.113 > mrtg.cfg
SNMP Error:
no response received
SNMPv1_Session (remote host: "148.233.24.113" [148.233.24.113].161
                  community: "public"
                 request ID: 1754947341
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber sysObjectID on public at 148.233.24.113
SNMP Error:
no response received
SNMPv1_Session (remote host: "148.233.24.113" [148.233.24.113].161
                  community: "public"
                 request ID: 2064780561
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMP Error:
no response received
SNMPv1_Session (remote host: "148.233.24.113" [148.233.24.113].161
                  community: "public"
                 request ID: 2064780562
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)

C:\MRTG-2~1.3>
--------------------------------------------------------------------------------------------------

Any idea what it is I could be doing wrong?
public is the name of my community, and 148.233.24.113 is the address of my cisco 1602 router.
what else should I check? I really don't know what port to look into (if that is the problem)...I
just want the input and output statistics...
thanks,
-Guillermo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.oetiker.ch/pipermail/mrtg/attachments/19990721/576fef5f/attachment.html