[mrtg] users on Cisco and Ascend

[Listas Opengate]

    Well Jim,

10xs for the help but can you show me an entire session using it!! I tried
but it didn't work. It put the snmp service in loop.



Gustavo Lima
Supervisor de Suporte
OPENGATE Internet
Tel.: 328-1990
http://www.opengate.com.br
----- Original Message -----
From: Jim Jones, Jr. <jimslists at arcomcontrols.com>
To: mrtg <mrtg at list.ee.ethz.ch>
Sent: Domingo, 25 de Julho de 1999 16:05
Subject: [mrtg] Re: users on Cisco and Ascend


> use this OID 1.3.6.1.4.1.529.15.9.0 for the modem usage on the ascend
> 6000... I dont know about the cisco .
>
> jim
> ----- Original Message -----
> From: Listas Opengate <listas at opengate.com.br>
> To: <mrtg at list.ee.ethz.ch>
> Sent: Sunday, July 25, 1999 10:01 AM
> Subject: [mrtg] users on Cisco and Ascend
>
>
> >     Hi all,
> >
> > I was cracking my brain to discover how to monitor dialup users on Cisco
> > 2511 and on Ascend Max 6000 using mrtg 2.8.5 without a MIB. Or if I need
a
> > MIB anyway how can I do it?
> >
> > Thanks
> >
> > Gustavo Lima
> > Supervisor de Suporte
> > OPENGATE Internet
> > Tel.: 328-1990
> > http://www.opengate.com.br
> > ----- Original Message -----
> > From: Glenn Forbes Fleming Larratt <glratt at rice.edu>
> > To: <mrtg at list.ee.ethz.ch>
> > Sent: Terça-feira, 29 de Junho de 1999 14:55
> > Subject: Re: [MRTG] users on Cisco and Ascend (Was <none>
> >
> >
> > > The command:
> > >
> > > "finger @Cisco2511 | egrep -c ' tty '"
> > >
> > > would get you the number connected to the Cisco - if you could
> > > write a Perl or other script to submit that number, the Ascend
> > > number, and two blank lines, then you could feed it to MRTG
> > > without needing a MIB.
> > >
> > > e.g.:
> > >
> > > Target[Cisco.and.Ascend]: ` finger @Cisco2511 | egrep -c ' tty ' ;
> > AscendUserCountScript ; echo 0 ; echo 0 `
> > >
> > > Of course, we outsource our dialup pool, and our "service"
> > > providers won't provide even RO community names, so I'm
> > > accustomed to reinventing the wheel.
> > >
> > > -g
> > >
> > > On Tue, 29 Jun 1999, Listas Opengate wrote:
> > >
> > > > Date: Tue, 29 Jun 1999 13:36:10 -0300
> > > > From: Listas Opengate <listas at opengate.com.br>
> > > > To: mrtg at list.ee.ethz.ch
> > > > Subject: [MRTG] <none>
> > > > Resent-Date: Tue, 29 Jun 1999 19:34:36 +0200 (MET DST)
> > > > Resent-From: mrtg at list.ee.ethz.ch
> > > >
> > > >
> > > > Hello all,
> > > >
> > > > can I monitor the number of connected users in a Cisco 2511 and in a
> > Ascend
> > > > Max 6000 simultaneously? Or even do this one-by-one?
> > > >
> > > > Thank's a lot
> > > >
> > > >
> > > >
> > > > Gustavo Lima
> > > > Supervisor de Suporte
> > > > OPENGATE Internet
> > > > http://www.opengate.com.br
> > > >
> > > > --
> > > > * To unsubscribe from the mrtg mailing list, send a message with the
> > > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > > > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> > > >
> > > >
> > >
> > > Glenn Forbes Fleming Larratt       glratt at rice.edu
> > > http://is.rice.edu/~glratt         Neil Talian?
> > > "Hatred is a self-indulgence [we] cannot afford." - Bill Bradley
> > >
> > >
> > >
> > > --
> > > * To unsubscribe from the mrtg mailing list, send a message with the
> > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> > >
> >
> > --
> > * To unsubscribe from the mrtg mailing list, send a message with the
> >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> >
> >
>
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg