[mrtg] Re: AS5800

[kikino su sardu]

Hi Anthony
Thank's for your scripts.
The results are good; this count is  similar to the count show from the
console

thank's Antony for your time

regard's


-----Original Message-----
From: kikino su sardu <kikino at box1.tin.it>
To: Anthony Hardy <soma at net1inc.net>; mrtg at list.ee.ethz.ch
<mrtg at list.ee.ethz.ch>
Date: 22 July, 1999 15:46
Subject: [mrtg] Re: AS5800


>Thank's Anthony,
>I'm try to test your configuration....
>I post the result tomorrow, if possible....
>
>Thank's for your time too
>kikino su sardu
>
>
>-----Original Message-----
>From: Anthony Hardy <soma at net1inc.net>
>To: kikino su sardu <kikino at box1.tin.it>; mrtg at list.ee.ethz.ch
><mrtg at list.ee.ethz.ch>
>Date: 21 July, 1999 22:46
>Subject: Re: [mrtg] Re: AS5800
>
>
>>Sure!
>>
>>Here is my modified version of get5200 that I am using to get reports out
>of my
>>5396 and 5800, as well as my 5200's . . . . . .
>>
>>There are several parts . . .and I'm not the best shell scripter in the
>world .
>>.but this DOES get all the current modem usage accurately!
>>
>>Use the script as normal . . . .to get the info if you don't have any isdn
>>usage . . .
>>
>>Where it says "my $portmax=$port+48;" I like to set the number (where I
>have
>>48) to the number of lines you have on the box to measure the analog
>>connections.  To measure the ISDN connections, you need to walk the tree
on
>>your box and find out how many serial connections (in my 5396's case, 91)
>it
>>has listed in its SNMP tree.  I have a separate copy of the script that I
>run
>>for each box, as each one has a different number of lines.  I can usually
>use
>>one script to do ISDN on all the boxes . . all of my 5396's with PRI's
have
>91
>>ISDN IOD's.  I have attached both of these files . . . . get-5396 and
>>get-5396-isdn.  They are the exact copies of the get-5200 script, BUT they
>have
>>the portmax+ number changed.  You can get decent data running just one
>script
>>on the 5300 and 5200's . . .but on the 5800 . .you HAVE to separate them
>out
>>because of the listing of the OID's to serial ports mappings (too much
>detail
>>to go into here).
>>
>>I have also attached the script I use to pull together the data from both
>isdn
>>and analog versions . . it is VERY basic and VERY tailored to my system ..
>so
>>don't blast me for not setting up variables and making it easy for
everyone
>to
>>use. . .hehe
>>
>>This would be meant for a guide only.
>>
>>Anthony
>>
>>
>>
>>
>>kikino su sardu wrote:
>>
>>> Hi Anthony,
>>> I have correct my "get5200" but I dont have any result.
>>> What is your modify for "get5200" ?
>>> Can you post me your "get5200" file ?
>>>
>>> Thank's for your time.
>>>
>>> kikino su sardu
>>>
>>> >I am doing this right now:) . . . .If you haven't gotten the answer,
>lease
>>> let
>>> >me know.  It is actually a hacked up version of get5200 (gets users n
an
>>> >AS5200).  Because of the way the 5800 handles ISDN vs modem alls I had
>to
>>> hack
>>> >the script some to get accurrate numbers. . .it actually runs three
>>> separate
>>> >scripts and compiles the information, which it then reports to mrtg.
>>> >
>>> >I've been using it for quite some time and it works GREAT!
>>> >
>>> >Like I said, if you need it, let me know.
>>> >
>>> >Anthony
>>> >
>>> >kikino su sardu wrote:
>>> >
>>> >> Ps: Sorry for my previous post....
>>> >>
>>> >> Hi,
>>> >> I have a little problem; I need to count how many user are onnected
>int
>>> my
>>> >> Cisco as5800.
>>> >> If possible I like to know  how many user are connected in ISDN n how
>>> many
>>> >> user are in PSTN.
>>> >>
>>> >> Can You help me?
>>> >> There is an OID for this operation?
>>> >> Can You have a sample MRTG configuration for this?
>>> >>
>>> >> Thanks in advance
>>> >>
>>> >> kikino
>>> >>
>>> >> --
>>> >> * To unsubscribe from the mrtg mailing list, send a message ith
the>>>
>>> subject: unsubscribe to mrtg-request at list.ee.ethz.ch
>>> >> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>>> >>>>--
>>> >> To unsubscribe from the mrtg mailing list, send a message with the>>
>>> subject: unsubscribe to mrtg-request at list.ee.ethz.ch
>>> >>*The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>>> >>
>>>
>>> --
>>> * To unsubscribe from the mrtg mailing list, send a message with the
>>>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
>>> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>>
>
>--
>* To unsubscribe from the mrtg mailing list, send a message with the
>  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
>* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg