[mrtg] Re: Monitoring Memory and CPU on a Cisco
Starkweather, Mike
mike.starkweather at anheuser-busch.com
Tue Jul 27 15:34:50 MEST 1999
I am monitoring both variables on some routers. Because of the ranges for each
variable you are likely to have some trouble seeing both on the same graph. CPU
likely goes from 0 to 100 percent while memory will go from 0 to 8-64 MB. You
might have some luck if you divide the memory value by "total RAM/100" (to scale
from 0 to 100 percent).
Mike Starkweather
> -----Original Message-----
> From: Stieers, Ken [SMTP:KStieers at DainRauscher.com]
> Sent: Tuesday, July 27, 1999 6:47 AM
> To: 'Duncan Browne'; mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Monitoring Memory and CPU on a Cisco
>
> Duncan,
>
> If they are both a single OID, its simple:
>
> Target[cpu.mem]: cpu_oid&mem_oid:public at ip
>
> You'll probably want to change the legends, so you should look up the legend
> settings in config.hmtl for pointers.
>
> Ken
>
>
>
> > -----Original Message-----
> > From: Duncan Browne [mailto:dunbro at int.ozemail.com.au]
> > Sent: Tuesday, July 27, 1999 2:18 AM
> > To: mrtg at list.ee.ethz.ch
> > Subject: [mrtg] Monitoring Memory and CPU on a Cisco
> >
> >
> > Can someone tell me if its possible to combine processor and memory
> > utilization
> > on the one mrtg graph and how its done? I am currently
> > running just cpu on
> > its own.
> >
> >
> >
> > Thanx,
> >
> > ************************************
> > Duncan Browne
> > Network Engineer
> > UUNet Australia / OzEmail Ltd
> > e-mail: dunbro at int.ozemail.com.au
> > *************************************
> >
> >
> > --
> > * To unsubscribe from the mrtg mailing list, send a message with the
> > subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> >
>
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
> subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>
--
* To unsubscribe from the mrtg mailing list, send a message with the
subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
More information about the mrtg
mailing list