[mrtg] Re: ifInDiscards OID syntax

[Stieers, Ken]

You have a second Target line at the bottom.  You should only have one
target line with the same name (the part between the []). 

Ken 


> -----Original Message-----
> From: Malcolm Jackson [mailto:Malcolm.Jackson at nottingham.ac.uk]
> Sent: Tuesday, July 27, 1999 8:35 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] ifInDiscards OID syntax
> 
> 
> 
> [Beginner currently using mrtg-2.7.5 on Debian Linux box. I hope my 
> question will be clear (HA!) and I'd be v.grateful for any 
> assistance.]
> 
>  Hi, I'm unsure of the correct syntax to use on the OID of an 
> ifIn[Out]Discards target.
> 
>  Below is a small section of a cfg file which was created 
> using cfgmaker. I 
> manually edited the file to include the ifInDiscards OID 
> line. Why does 
> mrtg stop running when I do that?
> 
>  The commented-out line was the original line when created 
> with cfgmaker. 
> MRTG stops whether I include the line or not.
> 
> # Target[128.243.3.1.2]: 2:public at 128.243.3.1
> # Next line is ifInDiscards OID target
> Target[128.243.3.1.2]:1.3.6.1.2.1.2.2.1.13&1.3.6.1.2.1.2.2.1.1
> 9:public at 128.2
> 43.3.1
> MaxBytes[128.243.3.1.2]: 12500000
> Title[128.243.3.1.2]: cca Router (No hostname defined for IP 
> address): 
> 3Com_NETBuilderETH/2-1
> PageTop[128.243.3.1.2]: <H1>Traffic Analysis for 
> 3Com_NETBuilderETH/2-1
>  </H1>
>  <TABLE>
>    <TR><TD>System:</TD><TD>cca Router in </TD></TR>
>    <TR><TD>Maintainer:</TD><TD></TD></TR>
>    <TR><TD>Interface:</TD><TD>3Com_NETBuilderETH/2-1 (2)</TD></TR>
>    <TR><TD>IP:</TD><TD>No hostname defined for IP address 
> (128.243.254.128)</TD></TR>
>    <TR><TD>Max Speed:</TD>
>        <TD>12.5 MBytes/s (ethernetCsmacd)</TD></TR>
>   </TABLE>
> 
> 
> Target[128.243.3.1.2]: 
> ifInDiscards.1&ifOutDiscards.1:public at 128.243.3.1
> 
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> 

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg