[mrtg] Re: installation and configuration
drk
drk at voyager.net
Thu Nov 11 18:23:17 MET 1999
Make sure that snmpd is running. A good way also to test if cfgmaker will work or not is to do a quick snmpwalk on the device before trying
On 0, Daniel Curry <dcurry at dollar.com> shared :
> I am attempting to install and configure MRTG on a RedHat 6.0 box.
>
> Here is the feedback I get.
>
> root at neon run]# ./cfgmaker public at jeep >> jeep_mrtg.cfg
> SNMP Error:
> no response received
> SNMPv1_Session (remote host: "jeep" [158.146.13.13].161
> community: "public"
> request ID: 456682086
> PDU bufsize: 8000 bytes
> timeout: 2s
> retries: 5
> backoff: 1)
> SNMPGET Problem for sysDescr sysContact sysName sysLocation ifNumber
> sysObjectID on public at jeep
> SNMP Error:
> no response received
> SNMPv1_Session (remote host: "jeep" [158.146.13.13].161
> community: "public"
> request ID: 1539348957
> PDU bufsize: 8000 bytes
> timeout: 2s
> retries: 5
> backoff: 1)
> SNMP Error:
> no response received
> SNMPv1_Session (remote host: "jeep" [158.146.13.13].161
> community: "public"
> request ID: 1539348958
> PDU bufsize: 8000 bytes
> timeout: 2s
> retries: 5
> backoff: 1)
>
> evidently I am missing something. could someone help me get this
> figured out?
>
> Thanks
>
>
> Daniel Curry
>
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
> subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
>
>
--
___
Daniel R. Kilbourne
Network Engineer
http://Voyager.net
drk at voyager.net
--
* To unsubscribe from the mrtg mailing list, send a message with the
subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
More information about the mrtg
mailing list