[mrtg] wrong logs?

[Justin Shore]

I finally got MRTG setup to monitor an assortment of things for an 
ISP including # of used dialin ports, traffic out of their CSU-DSU, 
and traffic out of each terminal server.  One problem though.  The TS 
traffic monitor is getting any data.  The log looks like this:

942739804 4206112273 1343514985
942739804 0 0 0 0
942739502 0 0 0 0
942739500 0 0 0 0
942739200 0 0 0 0

It returns no error (except for one TS which always gives an error 
and times out the first few times).  My cfg looks like this:

WorkDir: /home/httpd/html/stats/sktc
Target[ts-io-XXX.53.112.3]: 2:XXXXXX at 206.53.112.3
WithPeak[ts-io-XXX.53.112.3]: wym
#Colours[ts-io-XXX.53.112.3]: GOLD1#ffd700,BLUE#1000ff,DARK 
GREEN#006600,VIOLET#ff00ff
MaxBytes[ts-io-XXX.53.112.3]: 1250000
AbsMax[ts-io-XXX.53.112.3]: 1250000
RouterUptime[ts-io-XXX.53.112.3]: XXXXX at XXX.53.112.3
Title[ts-io-XXX.53.112.3]:  SKTC-TS1 Network Uplink
PageTop[ts-io-XXX.53.112.3]: <A HREF="http://www.sktc.net"><IMG 
SRC="logo.gif" BORDER=0></A><H2>SKTC-TS1 Network Uplink I/O</H2>
  <TABLE>
    <TR VALIGN=TOP><TD>Systems:<BR></TD><TD>
        SKTC-TS1
        <a href=ts-io-XXX.53.112.4.html>SKTC-TS2</a>
        <a href=ts-io-XXX.53.112.6.html>SKTC-TS3</a>
        <a href=ts-io-XXX.53.112.7.html>SKTC-TS4</a>
        <BR><B><a href=ts-io-overview.html>TSs Network I/O Overview</a></B>
    </TD></TR>
    <TR><TD>Interface:</TD><TD>AUI</TD></TR>
    <TR><TD>Hardware:</TD><TD>Computone Intelliserver</TD></TR>
   </TABLE>
Options[ts-io-XXX.53.112.3]:  gauge


I don't see anything wrong.  I tried abosolute in the options line as 
well.  Question, can anyone explain in layman's terms what guage and 
absolute are actually for.  The config docs were of absolutely no 
help there.  It even confused me more.  I don't think that's the 
problem though.  Each TS has 64 PPP ports (except for one, long 
story).  They all have two ethernet ports though, 1 BNC and 1 AUI.  I 
believe the AUI is the 2nd port (hell even Computone themselves 
couldn't tell me).  Only the AUI is used from what I've been told. 
Weird thing is that both port 1 and 2's inOctets are increasing.

interfaces.ifTable.ifEntry.ifInOctets.1 = 1006379267
interfaces.ifTable.ifEntry.ifInOctets.2 = 2108053602

That doesn't really make sense to me.  Anyhow, MRTG isn't storing any 
data.  I'm not even sure if its getting any of the data.  Can anyone 
offer any tips here?  I'm thoroughly confused.  TIA!

Justin

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg