[mrtg] MRTG won;t show outgoing bandwidth

[Mark]

I recently set up MRTG on my personal Linux box that has one NIC connected
to a cable modem. The problem I'm having is that it seems to show incoming
bandwidth just fine but doesn't show a thing for outgoing. Here is what I
have in mrtg.cfg...this came from running cfgmaker. 

Is there something I need to change in the "Target" line to allow it to
show in and out bandwidth or what am I missing here? It's a standard 10mb
NIC on eth0. Thanks for any assistance.


Target[cx681714-b.okcnw1.ok.home.com]: 2:public at 24.4.104.161
MaxBytes[cx681714-b.okcnw1.ok.home.com]: 1250000
Title[cx681714-b.okcnw1.ok.home.com]: emily (cx681714-b.okcnw1.ok.home.com):$
PageTop[cx681714-b.okcnw1.ok.home.com]: <H1>Traffic Analysis for eth0
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>Emily</TD></TR>
   <TR><TD>Maintainer:</TD><TD>Mark</TD></TR>
   <TR><TD>Interface:</TD><TD>eth0 (2)</TD></TR>
   <TR><TD>IP:</TD><TD>cx681714-b.okcnw1.ok.home.com (24.4.104.161)</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>1250.0 kBytes/s (ethernetCsmacd)</TD></TR>
  </TABLE>


--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg