[mrtg] Re: Cisco 2900 series switches

Peter Evans peter at gol.com
Sun Sep 12 13:58:38 MEST 1999


Jerry Shenk (jas at dect.com) wrote:
> In general, I think 30 bytes is probably something I'd just ignore anyway.  
> Overall I've been pleased with the info that I've gotten from the switch.  

	[snip!]

	This sounds like cdp, you could try turning it off and
	see if it goes away.

	its how cisco's know how they are connected to their siblings,
	for example:

Alpha-Switch>sh cdp nei
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
                  S - Switch, H - Host, I - IGMP, r - Repeater

Device ID        Local Intrfce     Holdtme    Capability  Platform  Port ID
kilo             Fas 0/2           132          R        2500      Eth 0
kraken           Fas 0/4           144          R        3640      Eth 0/0
mike             Fas 0/5           159          R        3640      Fas 0/0
arthur           Fas 0/3           176          R        7206VXR   Fas 1/0
papa             Fas 0/24          135          R        3620      Eth 0/0


	P
	----*
 

-- 
My words, my mail, my meaning.

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg


More information about the mrtg mailing list