[mrtg] Re: combined ports

[Anthony Roque Adriano]

why is that,  If one of the monitored interface goes down, MRTG cannot continue
polling the other interface and would not continue adding up the other interfaces,
it just died there.

Jeffrey Osborne wrote:

> Yes, but the data does not add up right.
>
> On Wed, 29 Sep 1999, Marc Neuckens wrote:
>
> > Did you try with a "space" between the "+" and the "2:xxxxx at 198.32.136.221".
> > This should work.
> >
> >
> > At 13:13 28/09/99 -0700, Jeffrey Osborne wrote:
> > >Im sorry sygma, I dont understand your answer. What does OID&OID mean?
> > >Here is a copy of my config with the com x out.
> > >
> > >Target[198.32.136.221.1]: 1:xxxxx at 198.32.136.221
> > >         +2:xxxxx at 198.32.136.221
> > >         +3:xxxxx at 198.32.136.221
> > >         +5:xxxxx at 198.32.136.221
> > >         +6:xxxxx at 198.32.136.221
> > >MaxBytes[198.32.136.221.1]:600000000
> > >Title[198.32.136.221.1]:OC3 1 to 5
> > >PageTop[198.32.136.221.1]: <H1>Ames Gigaswitch 1-5</H1>
> > >  <TABLE>
> > >    <TR><TD>Circuit:</TD><TD>OC3 #1</TD></TR>
> > >    <TR><TD>Interface:</TD><TD>AGL-2+ (1)</TD></TR>
> > >    <TR><TD>Max Speed:</TD>
> > >        <TD>700 MBytes/s (sonet)</TD></TR>
> > >   </TABLE>
> > >
> > >
> > >
> > >
> > >On Tue, 28 Sep 1999, sygma wrote:
> > >
> > > > in the Target, you could try like:
> > > > Target[total.oc3-link]: ( OID&OID:community at oc-1
> > > >                         + OID&OID:community at oc-2
> > > >                         + OID&OID:community at oc-3
> > > >                         + OID&OID:community at oc-4
> > > >                         + OID&OID:community at oc-5 )
> > > >
> > > > That might work :)
> > > >
> > > > ._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._.
> > > > Jon Nistor                            http://www.snickers.org/
> > > > sygma at snickers.org                    ICQ: 1429373
> > > > Network Operations                    FP: 66 3F 1B 23 C0 AA 40
> > > > IRC: sygma/efnet #snickers
> > > >
> > > > On Tue, 28 Sep 1999, Jeffrey Osborne wrote:
> > > >
> > > > > Greetings,
> > > > >
> > > > >     I am trying to make my MRTG add up my 5 oc3's. I had no problem
> > > > > with the single oc3 stats, but I dont seem to get the configuration right
> > > > > for all 5.
> > > > >
> > > > >
> > > > >
> > > > > To view my stats, check out http://aix.arc.nasa.gov
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > * To unsubscribe from the mrtg mailing list, send a message with the
> > > > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > > > > * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >--
> > >* To unsubscribe from the mrtg mailing list, send a message with the
> > >   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> > >* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg
> >
> > Greetings,
> >
> >
> > ---
> > Marc Neuckens           E-mail : marc at belbone.net
> > Internet Systems Engineer
> > Belgacom Corporate/Installation & Maintenance/DCS
> > Kard. Mercierlaan 2, B-1000 Brussels, Belgium
> >
> >
>
> --
> * To unsubscribe from the mrtg mailing list, send a message with the
>   subject: unsubscribe to mrtg-request at list.ee.ethz.ch
> * The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg

--
* To unsubscribe from the mrtg mailing list, send a message with the
  subject: unsubscribe to mrtg-request at list.ee.ethz.ch
* The mailing list archive is at http://www.ee.ethz.ch/~slist/mrtg