[mrtg] Re: Repost: NT Drive space OID not working

john.hoffman at za.pwcglobal.com john.hoffman at za.pwcglobal.com
Tue Aug 1 11:27:21 MEST 2000




Nick,

The OID you are using is representing the Percentage of Disk space
available/Free. Therefore a "Gauge" option as you indicate.

You're OID =  1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.6.48.58.48.58.67.58.0
Try this one.   1.3.6.1.4.1.311.1.1.3.1.1.5.1.4.6.48.58.48.58.67.58.0

This is Disk space used.  If this also fails, you may have an SNMP issue.

I have used both with no problems, yet on NT server and not Workstation.

Regards

John




Nick_Ellson at or.blm.gov on 31/07/2000 08:56:42 PM



To:   "Stieers, Ken" <KStieers at dainrauscher.com>
cc:   mrtg at list.ee.ethz.ch
Subject:  [mrtg] Re: Repost: NT Drive space OID not working
 Size: 6 Kb







Hi Ken,

When I posted this a while back (two weeks roughly) I had tried all variations
of leading "." trailing ".0" and such, no difference.

Here it is without the leading "."

D:\apps\mrtg\run>perl \apps\mrtg\run\mrtg \apps\mrtg\run\mrtg1.cfg
SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 3 (OID: 1.3.6.1.2.1.1.3.0)
SNMPv1_Session (remote host: "158.68.91.85" [158.68.91.85].161
                  community: "public"
                 request ID: 661726980
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for 1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.6.48.58.48.58.67.58.0 1.3.6.
1.4.1.311.1.1.3.1.1.5.1.3.6.48.58.48.58.68.58.0 sysUptime sysName on public at 158.
68.91.85
SNMPGET: Failed to reach target: "1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.6.48.58.48.58.
67.58.0&1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.6.48.58.48.58.68.58.0:public at 158.68.91.8
5". I tried multiple times! public at 158.68.91.85










"Stieers, Ken" <KStieers at dainrauscher.com> on 07/31/2000 11:23:35 AM








 To:      Nick Ellson/ORSO/OR/BLM/DOI at BLM,
          mrtg at list.ee.ethz.ch

 cc:



 Subject: RE: [mrtg] Repost: NT Drive space OID not working








Use no leading dot (see below):

Target[ORSO109]:
1.3.6.1.4.1.311.1.1.3.1.1.5.1.3.6.48.58.48.58.67.58.0&1.3.6.
1.4.1.311.1.1.3.1.1.5.1.3.6.48.58.48.58.68.58.0:public at 158.68.91.85




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



----------------------------------------------------------------
The information transmitted is intended only for the person or entity to which
it is addressed and may contain confidential and/or privileged material.  Any
review, retransmission, dissemination or other use of, or taking of any action
in reliance upon, this information by persons or entities other than the
intended recipient is prohibited.   If you received this in error, please
contact the sender and delete the material from any computer.



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list