[mrtg] Re: MRTG - Failed to reach target.

[Keith Kruepke]

Vladimir,

I think "Failed to reach target" usually means that the target's IP address could not be reached (could be no route or blocked by a router or firewall), or it is not running SNMP.  There may be other causes as well...

If this was working before, what changed on your network?

Keith

----- Original Message ----- 
From: "Vladimir Alonso" <vlalonso at telx.com>
To: "Mrtg List (E-mail)" <mrtg at list.ee.ethz.ch>
Sent: Friday, August 18, 2000 9:47 AM
Subject: [mrtg] MRTG - Failed to reach target.



Hi list,
Please, every body can help me to fix this problem with a Cisco Routers.
Before, the system was working well.
Thank you,

Vladimir

PROBLEM:

SNMPGET Problem for ifInOctets.1 ifOutOctets.1 sysUptime sysName ifDescr.1
on pu
blic at 192.42.42.1
SNMPGET: Failed to reach target: "1:public at 192.42.42.1". I tried multiple
times!
 public at 192.42.42.1
SNMP Error:
no response received
SNMPv1_Session (remote host: "192.42.42.1" [192.42.42.1].161
                  community: "public"
                 request ID: 1817038963
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)



Vladimir Alonso
Telx Communications Corp.
phone: (212) 285 4700 x2259
E-mail: vlalonso at telx.com


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi