[mrtg] Re: Cisco PIX 520

[cpt2 at daimlerchrysler.com]

SNMP might be enabled but on a different port besides the default 161.
Also, there probably is a serial port on it you can connect to, to
configure and check all these settings.

Where did you get the setting for the community, etc?  From the manual?
These can be changed, perhaps someone has changed them and never documented
these changes, as it often happens.

chris




"Congdon, Christopher" <CCongdon at WorkNET.net>@list.ee.ethz.ch on 02/04/2000
04:49:18 PM

Sent by:  mrtg-bounce at list.ee.ethz.ch


To:   mrtg at list.ee.ethz.ch
cc:

Subject:  [mrtg] Re: Cisco PIX 520


It would appear the SNMP is not open on the PIX. There are no firewalls
between myself and the PIX, so that wouldn't be the problem.

These are the following SNMP commands that are part of the PIX's config:
(Community not published, of course!)

snmp-server location Indianapolis Base Station
snmp-server contact WCI NOC
snmp-server community *******
no snmp-server enable traps


I have verified that the community name I'm using with Getif is the same as
listed in the PIC's config.


Christopher



-----Original Message-----
From: cpt2 at daimlerchrysler.com [mailto:cpt2 at daimlerchrysler.com]
Sent: Friday, February 04, 2000 4:37 PM
To: Congdon, Christopher
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Cisco PIX 520



Use the reachability function on Getif to see if port 161 (SNMP) is
available.  If it is, perhaps the packets are blocked by a firewall, or
maybe the community is something different than the default "public".

Chris





"Congdon, Christopher" <CCongdon at WorkNET.net>@list.ee.ethz.ch on 02/04/2000
04:28:44 PM

Sent by:  mrtg-bounce at list.ee.ethz.ch


To:   "MRTG Mailing List (E-mail)" <mrtg at list.ee.ethz.ch>
cc:

Subject:  [mrtg] Cisco PIX 520


I have a Cisco PIX 520 Firewall on my network. Thing is, I can't seem to
make SNMP function on it.I simply get a NO SNMP RESPONSE from Getif 2.2.

Can anyone help me with this?

Thanks,
Christopher Congdon

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg





--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg