[mrtg] Re: SNMP screwed on NT

[Charles Burton]

Here is an exported Text of my SNMP Extension Agents Sub. This an 3Com USR
Total Control with Edge Server built in.



-----Original Message-----
From: Garth K. Williams [mailto:garth.williams at home.com]
Sent: Monday, January 17, 2000 8:42 PM
To: Charles Burton
Subject: RE: [mrtg] Re: SNMP screwed on NT


Charles.

I would be pleased to help you.  If you could send me the SNMP registry
hive, I will look at it for you.  Also, if you could send me the perfmib.mib
that you are using, I have no doubt that we can resolve this for you.

TO SAVE SNMP HIVE:
- Start Regedt32
- Navigate to HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services/SNMP
- Make sure that SNMP is highlighted
- Select Registry/Save Key (as \TEMP\CBSNMP.KEY)

Regards!

Garth K. Williams

garth.williams at home.com
garth.williams at wtcs.org
----------------------------------------------------
http://www.wtcs.org/snmp4tpc
----------------------------------------------------
Home of "SNMP for the Public Community"
Support Site for SNMP, Windows NT, NetWare and MRTG
----------------------------------------------------


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Charles Burton
Sent: Monday, January 17, 2000 5:36 PM
To: 'Stieers, Ken'
Cc: 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: SNMP screwed on NT


Ok, I am fighting with this off and on. I tried apply in the Mib's from the
resource Kit and ones I have found here on this list. Here is what happens
currently:

SNMP Running fine
Use GetIf to query .iso.org.dod.internet
No problem
Use GetIf to query down into
.iso.org.dod.internet.private.enterprises.microsoft
SNMP on Server fail's with exception
Stop then Start SNMP
Go thru it again

Work's OK on all my other servers. I think my BOSS is finally getting the
picture that I am going to have to reinstall SNMP then reapply SP4 or SP5.
But, I would take any other suggestions


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Stieers, Ken
Sent: Monday, January 17, 2000 1:13 PM
To: Charles Burton; 'mrtg at list.ee.ethz.ch'
Subject: [mrtg] Re: SNMP screwed on NT


Charles,

Have you tried the the Perfmib files on the Exchange 5.5 CD, instead of the
ones on the ResKit CD?   Also, all of the NT OIDS end in an instance number,
usually .0.

Can you walk the tree?

HTH,

Ken
>
> I am not new to MRTG (going on two years and a dozen Servers) I got a
> stubborn one. I have reinstalled PERFMIB a few times trying
> to get it to
> work. I can't query past:
> .1.3.6.1.4.1.1.311.1.1.3.1.1.7
>


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg




-- Attached file removed by Listar and put at URL below --
-- Type: text/plain
-- Size: 1k (1336 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/Snmp.txt


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg