[mrtg] Re: Monitorize subinterfaces on Cisco LS1010 ATM Switch

Paul C. Williamson pwilliamson at MANDTBANK.COM
Fri Jul 21 20:33:47 MEST 2000


I *think* it's saying that the .12 interface does not exist.  Have you tried doing a manual snmpget on the subinterface?  Does it work with the .1 interface, but not the .12?  If it works with .1, what other interfaces/subinterfaces does it work with?

Paul

>>> Paulo Valverde Costa <pcosta at ccom.uminho.pt> 07/21/00 12:47PM >>>

Hello for all,

i send a post to MRTG List, but until now, no one could
help me... perhaps i don\'t explain the problem very
well.

I use MRTG 2.8.12 to monitorize a Cisco ATM Switch
LS1010. Until now,
everything is all right... the problems appears when i
reconfigure
the interfaces of the switch and create subinterfaces.

when i run cfgmaker, everithing is oK! in the cfg file
the subinterfaces appears
:
for example:

Target[192.168.xxx.zzz.12]: 12:public at 192.168.xxx.zzz 
MaxBytes[192.168.xxx.zzz.12]: 16250
Title[192.168.xxx.zzz.12]: ATM-Switch-UM (): ATM0/0/1.13
PageTop[192.168.xxx.zzz.12]: <H1>Traffic Analysis for
ATM0/0/1.13
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>ATM-Switch-UM in </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>Interface:</TD><TD>ATM0/0/1.13 (12)</TD></TR>
   <TR><TD>IP:</TD><TD> ()</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>16.2 kBytes/s (ATM Logical Port)</TD></TR>
  </TABLE>

-------------------------------
 Note: subinterface ATM0/0/1.13
------------------------------

but when i run: mrtg ls101.cfg , appears the error only
for the subinterface that i have created (i have more
sub interfaces, this is only one example), and the graph
appears with nothing...


SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.2.2.1.10.12)
SNMPv1_Session (remote host: \"192.168.xxx.zzz\"
[192.168.xxx.zzz].161
                  community: \"public\"
                 request ID: 2058511608
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for ifInOctets.12 ifOutOctets.12
sysUptime sysName ifDescr.12 on
 public at 192.168.xxx.zzz 
SNMPGET: Failed to reach target:
\"12:public at 192.168.xxx.zzz\". I tried multiple t
imes! public at 192.168.xxx.zzz 


 I need to monitorize subinterfaces, someone help me
whith something... perhaps isn\'t possible collect data
from subinterfaces!!! What is that error?
 
best regards,
Paulo Costa
 


------------------------------------
Paulo Valverde Costa
TSI - Centro de Comunicações
Universidade do Minho
Campus de Gualtar
4710-057 BRAGA
PORTUGAL
Tel: + 351 253 604434
Fax: + 351 253 604021
------------------------------------

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



More information about the mrtg mailing list