[mrtg] Re: External program problem

[Alex van den Bogaerdt]

Aaron Dewell wrote:

> > (185 *is* a valid number of lines, isn't it?)
> > 
> > > Any ideas as to what  might be going on here?
> > 
> > Most likely a problem in your options line or, less likely, in MaxBytes.
> > See also my previous post which addresses a similar case.

> Yes, 185 is the correct value for *now*, but why is the rest of the file
> zeros?  Options are growright and bits, that's it.  I also tried adding
> gauge to the Options with no success.

Hmmm, if you set your options to bits, the value will be multiplied
by eight.  This won't be right for RAS connections.  Apart from that,
it shouldn't matter.

Option gauge should be used.  Check out the config.txt file in your
MRTG distribution or on the web site.

Create a config file that has just enough in it to show the problem.
You can leave out all the nice HTML formatting stuff etcetera.  Check
if this config file works.  If it doesn't, replace the community string
and the host name with "xxxxxx" and post it to the list.

regards,
-- 
   __________________________________________________________________
 / alex at slot.hollandcasino.nl                  alex at ergens.op.het.net \
| work                                                         private |
| My employer is capable of speaking therefore I speak only for myself |
+----------------------------------------------------------------------+
| http://faq.mrtg.org/                                                 |
| http://rrdtool.eu.org  --> tutorial                                  |
+----------------------------------------------------------------------+

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi