[mrtg] Re: Cisco Catalyst 2900 Problem

[Hall J D (ISaCS)]

Hello John,

The SA2 software on the Catalyst 2900XL has known SNMP problems. Time to
upgrade your software.

Cheers,

Jonathan Hall
Network Services Group, University of Glamorgan

-----Original Message-----
From: john wear [mailto:jdw at mps.ohio-state.edu]
Sent: Wednesday, May 31, 2000 5:59 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Cisco Catalyst 2900 Problem


Hi,

	I have a bunch if 2900 series switches that I've bought over the
course
of the last few years.  MRTG works great with some of them, but with
others I
get "funny looking" graphs for usage.  In all cases I'm using cfgmaker
to build
the mrtg.cfg.  The funny looking graphs will be of the form:  almost no
usage
on all ports of the switch, with a spike of usage every once in a while,
like
at 8:00, 13:00, 19:00, 0:00, etc.  The data in the log files corresponds
to the
weird usage patterns.  Each port on the switch in question will show
this pattern,
with data spikes at the same times, but with different magnitudes to the
spikes.
The graphes for switches where I get "good" data look about as I'd
expect.
The switches which give good data are at rev level V11.2(8)SA4 or
above.  The
switches giving me funny looking data are all at rev level V11.2(8)SA2. 
Has
anyone else experienced this problem, and/or has anyone upgraded the
firmware
on one of these Cisco switches without ruining it in the process?

Thanks, j.d.

J.D. Wear
*The* OSU Dept. of Physics
(614) 292-3401

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org