[mrtg] Re: question

[Shao Qun]

Thanks to everyone ,

The reason is just as what you said about poor unzip
tool I used.
I have corrected it .

-----Original Message-----
From: Joey Officer [mailto:jofficer at insidehouston.org]
Sent: Wednesday, March 15, 2000 10:57 AM
To: Shao Qun
Cc: MRTG Mailling List
Subject: RE: [mrtg] Re: question


sounds like you did not unzip the package with directory structure.  if you
are using a dos level program (ie pkunzip) then try pkunzip -d
mrtg-2.x.x.zip

this will create the directory structure.

if you are using something like winzip, make sure the paths option is turned
on.

HTH

Joey Officer
Systems Analysts
Quality Publishing, Inc.
281-272-2744 x156 -Work
jofficer at insidehouston.org

+---------------------------------------+
| no matter where you go, there you are |
|                                       |
|          --buckaroo banzai            |
+---------------------------------------+

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Shao Qun
Sent: Tuesday, March 14, 2000 6:45 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: question


Thank you.

After I unzipped the MRTG, there is not sub directory
such as "run" or "cfg" to be created.
Everything is in the directory named "MRTG"
and I exceed the command under that
too.

sounds there are still something we do not know?

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Stieers, Ken
Sent: Tuesday, March 14, 2000 10:22 PM
To: 'Shao Qun'; mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: question


Try this:

perl c:\mrtg\run\cfgmaker ****@ip > c:\mrtg\cfg\mrtg.cfg

(change the paths to what makes sense on your system.

HTH,

Ken

> I want to install the MRTG on my NT server.
> I followed what wrote by Steve Pierce named
> "The Window NT Guide to MRTG",
> but failed on exec the command as
> "perl cfgmaker ****@ipaddress > mrtg.cfg"under
> the MRTG folder, it returned the error message as
> "Can't open ****@ipaddress: No such file or directory".
> i am sure that SNMP community is right and
> the ipaddress is right too.
>
> who can tell me why and what to do ?
>
> thanks a lot.
>

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Help        mailto:mrtg-request at list.ee.ethz.ch?subject=help
Archive     http://www.ee.ethz.ch/~slist/mrtg