[mrtg] Re: GetSNMPLinesUP.pl

[alex at ergens.op.Het.Net]

Olivier Gontier wrote:
> result of perl program:
> 
> host>49% /home/mrtg-2.8.8/run/GetSNMPLinesUP.pl mycisco
> 2
> 0
> 181180482
> mycisco.ifremer.fr

Looking good.  Now check this from the cron environment, not
from the command prompt, as the PATH setting can be different.


> modem.cfg:
> .....
> Target[cisco]: `/home/mrtg-2.8.8/run/GetSNMPLinesUP.pl mycisco`
> WithPeak[cisco]: wym
> Options[cisco]: growright, absolute, gauge

This shouldn't be the problem but IIRC you should not use that
"absolute" setting here.  Use gauge only.


> in the cisco.log:
> 
> 953290503 0 0 0 0
> 953290500 0 0 0 0
> 953290200 0 0 0 0

You left out the most important line.  The first line, containing
only three lines, is what MRTG received from the script ...

regards,
-- 
   __________________________________________________________________
 / alex at slot.hollandcasino.nl                  alex at ergens.op.het.net \
| work                                                         private |
| My employer is capable of speaking therefore I speak only for myself |
+----------------------------------------------------------------------+
| http://faq.mrtg.org/                                                 |
| http://rrdtool.eu.org/tutorial/                                      |
+----------------------------------------------------------------------+

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org