[mrtg] outgoing traffic

[Oezdemir Zekeria Kreuzlingen]

hi peoples

i am monitoring a stack of hubs (3x PS500 and 1xPS50 from 3com). to get the
datas i connect to the ps50 hub and i get the datas from all the 96 ports in
the stack. the problem is that i get only incoming traffic. the "blue" =
outgoin traffic is always "0". any idea why?
i atached an example.

thanks for help.
greets
zeki
 <<example.gif>> 

-------------
Target[xxx.xx.xx.xxx.3875]: 3875:public at xxx.xx.xx.xxx
MaxBytes[xxx.xx.xx.xxx.3875]: 1250000
Title[xxx.xx.xx.xxx.3875]: NE-41 (): RMON "Seg-1" on Unit 4
PageTop[xxx.xx.xx.xxx.3875]: <H1>Traffic Analysis for RMON "Seg-1" on Unit 4
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>NE-41 in </TD></TR>
   <TR><TD>Maintainer:</TD><TD></TD></TR>
   <TR><TD>Interface:</TD><TD>RMON "Seg-1" on Unit 4 (3875)</TD></TR>
   <TR><TD>IP:</TD><TD> ()</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>1250.0 kBytes/s (ethernetCsmacd)</TD></TR>
  </TABLE>
------------------



-- Attached file removed by Listar and put at URL below --
-- Type: image/gif
-- Size: 3k (3985 bytes)
-- URL : http://www.ee.ethz.ch/~slist/pantomime/example.gif


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org