[mrtg] Cisco 3640 Modems in use OID.

[Steven Sporen]

Hi,

I'm running IOS version 12.0(7)T on a 3640 with a PRI ISDN and MICA modems.

I've looked through the archives for OID's to monitor the number of active
ISDN connections on the device and found, 

'cpmISDNCfgBChanInUseForAnalog' => '1.3.6.1.4.1.9.10.19.1.1.2.0',
        The number of configured ISDN B-Channels that are
        currently occupied by analog calls.
'cpmISDNCfgBChannelsInUse'      => '1.3.6.1.4.1.9.10.19.1.1.3.0', 
        The number of configured ISDN B-Channels that are
        currently occupied by both Digital and Analog calls.
'cpmActiveDS0s'                 => '1.3.6.1.4.1.9.10.19.1.1.4.0',
        The number of DS0s that are currently in use.

This looked promising as the person said they had it running on IOS
12.0(4)T1. But using snmpwalk I get the following:

1.3.6.1.4.1.9.10.19.1.1.2.0	1
1.3.6.1.4.1.9.10.19.1.1.3.0	1
1.3.6.1.4.1.9.10.19.1.1.4.0	1
1.3.6.1.4.1.9.10.19.1.1.5.0	1
1.3.6.1.4.1.9.10.19.1.1.6.0	0
1.3.6.1.4.1.9.10.19.1.1.7.0	0
1.3.6.1.4.1.9.10.19.1.1.8.0	5
1.3.6.1.4.1.9.10.19.1.1.9.1.3.0.0	0	1
1.3.6.1.4.1.9.10.19.1.1.9.1.4.0.0	0	5

At the time of SNMP pull we had two modem users online.

I'd like to monitor number if ISDN lines in use (for ISDN calls) and number
of active async modems. Has anyone got this working? I've looked at the
OID's stored on the ftp.cisco.com site but they don't have the information
on the ISDN lines.

Thanx in advance.

 Regards
  Steven Sporen

Snr Network Admin, ECnet | www.ecnet.co.za

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org