[mrtg] Re: How can I...

[Congdon, Christopher]

Try:

Unscaled[target]: dwmy

This will scale the graph all the way to maxbytes.

Chris

-----Original Message-----
From: Dayton Jones [mailto:daytonj at netdrive.com]
Sent: Wednesday, May 03, 2000 12:56 PM
To: Mohammed, Hadiza L
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: How can I...


I have that...sorry should have included it...

The "problem" is the legend on the y-axis (left hand side)...it says 
	bits per second (which is fine)
	1600.0 k (which I want to read 1.5 M [or .5 M, etc])

I've seen other charts that have this, I just don't see how to set this in
the config...

Thanks again


On Wed, 3 May 2000, Mohammed, Hadiza L wrote:

> Dayton,
> 
> To make the chart look better, you could add the line
> 
> MaxBytes[xxxxx.1]: <value> 
> 
> where value is 1.54 Mbits divided by 8 to give you the bytes. That gives
you
> a dotted red line on the chart indicating the full T1 bandwidth.
> 
> Hope this helps,
> Hadiza
> 
> 
> -----Original Message-----
> From: Dayton Jones [mailto:daytonj at netdrive.com]
> Sent: Wednesday, May 03, 2000 1:32 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] How can I...
> 
> 
> I'm sure this has been asked many times but I didn't see it in the
> archive.
> 
> I'm using MRTG to poll a Cisco 2514 to watch my company's T1 bandwidth.
> 
> 	Options[xxxxx.1]: growright,unknaszero,bits
> 
> this is working great except that the graphs show the increments in
> kb/s...what I want is for them to say mb/s...so that when we are using the
> full 1.54M the chart shows 1.5M instead of 1600.0k
> 
> I tried using 
> 	kilo[xxxxx.1]: 1024 
> but it seemed to make no difference....what can I do to resolve this?
> Thanks in advance for any help offered.
> 
> -- 
> 
> Dayton Jones
> daytonj at netdrive.com            |       System Administrator,
> http://www.netdrive.com         |       netdrive.com, Inc.
> ph. (408) 399-1882 x109         |       985 University Ave, Suite 8
> fx. (408) 399-1884              |       Los Gatos, CA 95032
> 
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> 

-- 

Dayton Jones
daytonj at netdrive.com            |       System Administrator,
http://www.netdrive.com         |       netdrive.com, Inc.
ph. (408) 399-1882 x109         |       985 University Ave, Suite 8
fx. (408) 399-1884              |       Los Gatos, CA 95032

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org