[mrtg] Re: MRTG 2.8.12

[Kruepke]

Actually, I think an important distinction to make is that SNMP traps do not necessarily need to be enabled.  MRTG does not use traps at all.

It may be the case that some vendors' equipment may need to have traps enabled for SNMP to run, that that is a different case.  I can speak about Cisco routers specifically, and they do not need traps enabled for SNMP to work.

Keith

----- Original Message ----- 
From: "Paul C. Williamson" <pwilliamson at MANDTBANK.COM>
To: <mrtg at list.ee.ethz.ch>; <ffebles at planergyservices.com>
Sent: Wednesday, May 17, 2000 2:07 PM
Subject: [mrtg] Re: MRTG 2.8.12


What are you querying?  Cisco? Bay? IBM?  Are they routers, switches, network cards on PCs?  What ever it is needs to have SNMP traps enabled.  

Paul Williamson
Manager of EMS
M&T Bank Corporation

>>> "Febles, Felicia" <ffebles at planergyservices.com> 05/17/00 02:22PM >>>
I'm running NT 4.0 SP 5, when I run cfgmaker from a command prompt it comes
back with an error that says 

SNMPGET problem for sysDescr sysContact sysName sysLocation ifNumber
sysObjectID on public at xx.xx.xx.xx 
no response received. 

Any ideas? 
Felicia

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe 
Archive     http://www.ee.ethz.ch/~slist/mrtg 
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org 



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subjectArchive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org