[mrtg] Re: Monitoring ATM sub-interface problem

[Enerson, Marty]

I monitor 7 sub interfaces on a 7206 with an ATM IMA card.  I HAD to monitor
the aal5snap interfaces to get the correct information.

It works fine.

Marty

-----Original Message-----
From: Luis Carlos Solano [mailto:lsolano at racsa.co.cr]
Sent: Friday, November 10, 2000 10:36 AM
To: Lista mrtg
Subject: [mrtg] Re: Monitoring ATM sub-interface problem



Wang Chen escribió:

> Is there anybody successfully monitoring Cisco router ATM sub-interface at
sub-if level.
> I have the output from aal5, but sub-if. We would like to monitoring
trafic of ATM sub-interface at
> subif. Form mrtg.conf,  we've got nosuchname error of SNMP. I realize the
MIB entry may not
> there. The error like following:

I think is not possible, I have the same problem. For example, I vahe some
Access servers conected via an ATM
PVC, (ex: 4/0/0.5) but the MIBS I can get are just for "the whole"  4/0. I
did solve the problem "watching" the
traffic at mi AS interface.

lc.


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi