[mrtg] Re: bandwidth totals ?

[Marc Bilodeau]

Sure.. You can accomplish this by simple math functions +, -, /, *

Here is an example how this is performed. You may have to make some
modifications depending on what you wish to measure.

# This Report File Template measures In/Out Octets on a MIB-II ATM Port

Target[Cisco_7513-ATM-PVC]:
1.3.6.1.4.1.9.9.66.1.1.1.1.3.27.1.50&1.3.6.1.4.1.9.9.66.1.1.1.1.3.27.1.50:pu
blic at 172.20.1.1 +
1.3.6.1.4.1.9.9.66.1.1.1.1.4.27.1.50&1.3.6.1.4.1.9.9.66.1.1.1.1.4.27.1.50:pu
blic at 172.20.1.1
MaxBytes[Cisco_7513-ATM-PVC]: 1250000
WithPeak[Cisco_7513-ATM-PVC]: dwmy
Options[Cisco_7513-ATM-PVC]: bits, growright
Title[Cisco_7513-ATM-PVC]: Utilization (in/out bits/second) on Cisco 7513
ATM Link
PageTop[Cisco_7513-ATM-PVC]: <H1>Utilization (in/outbits/second) on Cisco
7513 ATM Link</H1>


-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of bob jaques
Sent: Monday, November 20, 2000 8:32 PM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] bandwidth totals ?



I am monitoring a cisco 7000 router and lookin at bandwidth off of a 100 meg
ethernet I would like
mrtg to display a total bandwidth of in and out together is ths possible

	          Bob Jaques

 Senior Director, Technical Operations
PlanetOut Corp.   http://www.planetout.com
657 Harrison Street,
San Francisco, CA 94107
tel:  415.486.2561  cell: 415.595.7496
fax: 415.486.2597  IM jaques664
 email: bjaques at planetout.com
 page:  page-bob at planetout.com




--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi