[mrtg] Cisco Router Frame Relay OID Problem

[mike]

I'm trying to get MRTG up and running on a client site monitoring the Frame 
Relay Interfaces to generate some stats. If I try to retrieve information 
from either the RFC1315 or the CISCO-FRAME-RELAY MIB through MRTG it 
doesn't work, failing with a 'no such name' error. Using GetIf, I can 
browse the MIB on the C2600 in question and using snmpget (CMU) from the 
command line I get the correct responses. I have attached the errors below:

Trying to return a value for the following which is the frCircuitState for 
the DLCI (I hope!)

1.3.6.1.2.1.10.32.2.1.3.2.502:public at 10.10.9.2

MRTG:

SNMP Error:
Received SNMP response with error code
  error status: noSuchName
  index 1 (OID: 1.3.6.1.2.1.2.2.1.10.502)
SNMPv1_Session (remote host: "10.10.9.2" [10.10.9.2].161)
                  community: "public"
                 request ID: 998772632
                PDU bufsize: 8000 bytes
                    timeout: 2s
                    retries: 5
                    backoff: 1)
SNMPGET Problem for ifInOctets.502 ifOutOctets.502 sysUptime sysName on 
public at 10.10.9.2

CMU SNMPGET:

[root at qvsnm1 mrtg]# snmpget 10.10.9.2 public .1.3.6.1.2.1.10.32.2.1.3.2.502
Name: transmission.32.2.1.3.2.502 -> INTEGER: 2

Which is the Up state. Basic MRTG functions work perfectly - does anyone 
have any ideas?

Cheers,

Michael Butler






--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi