[mrtg] Problems with data

[Robert Plane]

I have created an .cfg file to check the temp on an APC
 
Target[apctemp]:
1.3.6.1.4.1.318.1.1.1.2.2.2.0&1.3.6.1.4.1.318.1.1.1.2.2.2.0:public at 208.193.1
6.33  * 9 / 5 +32
 
The first time I run it, it puts 86 (which is right) in the log file. I call
it every 5 minutes but nothing ever shows up beyond the initial run. "The
statistics were last updated" has the correct time and date, but no data
 
Any Ideas
 
Thanks
 
970851008 86 86
970851008 0 0 0 0
970850976 0 0 0 0
970850700 0 0 0 0
970850400 0 0 0 0
970850100 0 0 0 0
970849800 0 0 0 0
970849500 0 0 0 0
970849200 0 0 1 1
970848900 0 0 0 0
970848600 0 0 0 0
970848300 0 0 0 0
970848000 0 0 0 0
970847700 0 0 0 0
970847400 0 0 0 0
970847100 0 0 0 0
970846800 0 0 0 0
970846500 0 0 0 0


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi