[mrtg] Re: naming y-axis and naming graphed data

[John W. Bankson]

Hans,

	Here is the Config I use to monitor the CPU Load on my Cisco 3640
router, and it works.  I only monitor the 5 minute OID since I only poll
every five minutes.  I'm not sure why you are showing a percentage, unless
you are talking about the shortlegend.  Anyway, I hope this helps.  Good
luck.

John Bankson

#---------------------------------------------------------------------------
---

Target[CPU]:1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.57.0:public at 10.3.1.2
RouterUpTime[CPU]: public at 10.3.1.2
MaxBytes[CPU]: 100
Title[CPU]: KC_Plaza (Plaza Router): CPU Load - Plaza Router
PageTop[CPU]: <H1>CPU Load % - Plaza Router</H1>
 <TABLE>
   <TR><TD>System:</TD><TD>KC_Plaza Cisco 3640</TD></TR>
   <TR><TD>Maintainer:</TD><TD><A HREF="mailto:jbankson at pswlaw.com">John W.
Bankson</TD></TR>
   <TR><TD>Device:</TD><TD>3640 CPU Load %</TD></TR>
  </TABLE>
Unscaled[CPU]: ymwd
ShortLegend[CPU]: %
XSize[CPU]: 380
YSize[CPU]: 100
YLegend[CPU]: CPU Utilization
Legend1[CPU]: CPU Utilization in % (Load)
Legend2[CPU]: CPU Utilization in % (Load)
Legend3[CPU]: 
Legend4[CPU]: 
LegendI[CPU]: 
Legendo[CPU]: &nbsp;Usage
Options[CPU]: gauge


#---------------------------------------------------------------------------
---

-----Original Message-----
From: Hans van Beek [mailto:hans.van.beek at BETONSON.com]
Sent: Tuesday, October 10, 2000 9:10 AM
To: mrtg at list.ee.ethz.ch
Subject: [mrtg] naming y-axis and naming graphed data



Hi,

I'm monitoring the cpu-load of a router but I don't want it displayed as
bytes per second, but as percentage.
I'm currently using the oid's for the 1 minute and the 5 minute cpu-average.

I've used the following options, but I cant seem to find any to change the
bytes per second and the in and out names.

Target[10.10.1.1_cpu]:
1.3.6.1.4.1.9.2.1.58.0&1.3.6.1.4.1.9.2.1.57.0:public at 10.10.1.1
MaxBytes[10.10.1.1_cpu]: 100
Options[10.10.1.1_cpu]: gauge, integer

Anybody got any suggestions of what I'm missing or doing wrong?

Greetings,

Hans van Beek

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi


    ----------------------------------------------------------------
    This  electronic mail  message contains CONFIDENTIAL information
    which is (a) ATTORNEY - CLIENT  PRIVILEGED  COMMUNICATION,  WORK
    PRODUCT,  PROPRIETARY IN  NATURE, OR  OTHERWISE PROTECTED BY LAW
    FROM  DISCLOSURE,  and  (b) intended  only for  the  use  of the
    Addressee(s)  named  herein. If you are not an Addressee, or the
    person  responsible for delivering this to an Addressee, you are
    hereby  notified  that  reading,  copying,  or distributing this
    message is prohibited. If you have received this electronic mail
    message  in error, please reply to the sender and take the steps
    necessary  to delete  the message  completely from your computer
    system. Thank you.



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi