[mrtg] Bad command or file name

[Jeff Liebermann]

MRTG 2.9.2 running on Windoze 98SE.
Monitoring just my Cisco 2514 router ethernet traffic
(to keep debugging simple)
I'm getting the error message:
   "Bad command or file name"
when run from the command prompt.

Turning on debugging in the mrtg perl script belches:
C:\>  perl c:\mrtg-2.9.2\bin\mrtg c:\mrtg-2.9.2\bin\mrtg.cfg
--base: Creating Lockfiles 
c:\mrtg-2.9.2\bin\mrtg.cfg_l,c:\mrtg-2.9.2\bin\mrtg.cfg_l_-3942117
--base: Reading Config File: c:\mrtg-2.9.2\bin\mrtg.cfg
--base: Reading Interface Config cache
--base: Checking Config File
--base: Loading default Locale
--base: Starting main Loop
--base: Populate Target object by polling SNMP and external Datasources
--base: Act on Router/Target 192.168.111.250_1
--base: Get Current values: (23509, 69892, 1:16:16, Router, 972285778)
--base: Create Graphics
Bad command or file name
--base: Check for Thresholds
--base: Check for Write HTML Pages
--base: Exit main Loop
--base: Remove Lock Files
--base: Store Interface Config Cache

The HTML file is created, but no graphs.

Adding additional targets to the mrtg.cfg file adds additional
"bad command ..." error messages, one per target.

Any clues what's missing or what it's complaining about?



--
Jeff Liebermann 150 Felker St #D  Santa Cruz Ca 95060
(831)336-2558 voice (831)426-1240 fax (831)421-6491 pager
jeffl at comix.santa-cruz.ca.us  jeffl at cruzio.com


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi