[mrtg] Re: hacking cfgmaker +question

[Jim Hunt]

I too am using the Compaq MIBS and getting good results in testing.  I am
ramping up to monitor 30 servers.  However, on 3 servers, the data drive
(E:\) does not have a result of disk size or free space.  It shows up that
way using the Insight Manager or some other utilities.  Any thoughts?

Jim 

-----Original Message-----
From: John W. Bankson
To: Mrtg (E-mail); 'Patrick Bartkus'
Sent: 10/26/00 10:16 AM
Subject: [mrtg] Re: hacking cfgmaker


	I used the GetIf MIB browser to find the OIDs and so far all of
my
Compaq servers have returned the correct memory values.  Another note on
the
memory OIDs, originally I had thought that the physical memory and the
paging memory were exactly as they sounded, but the paging memory OIDs
are
actually the physical memory + the paging memory.  Therefore, I mainly
use
the paging memory OIDs to track my memory usage (This is the OID that is
used on the Integrated Management Displays for % Mem Utilization on
Compaq
Servers).  I guess the physical memory OIDs are useful for knowing when
to
add more physical memory to your servers.

	What type of Compaq server(s) are you using, and what version of
SmartStart do you have loaded (I have it working with 4.7, 4.8 and 4.9)?

John

-----Original Message-----
From: Patrick Bartkus [mailto:patrckb at hotmail.com]
Sent: Thursday, October 26, 2000 9:37 AM
To: jbankson at pswlaw.com; mrtg at list.ee.ethz.ch
Subject: RE: [mrtg] hacking cfgmaker


Thanks, John!

I actually printed have your posting from 10 Oct where you listed these
OIDs

sitting on my desk.

I have been able to get the CPU Util and % Disk Spaces Used from our
Compaq 
Insight Manager agents. But the Physical Memory values don't return.
Reading

Compaq's MIB it says:

  DESCRIPTION   "Available paging memory (in megabytes).
             A -1 will be returned if this value could not be
determined."

I guess on my boxes, the value could not be determined.

Was there anything you had to do to get those values? Any suggestions on
how

I should hold my mouth <G>?

Patrick

>From: "John W. Bankson" <jbankson at pswlaw.com>
>To: 'Patrick Bartkus' <patrckb at hotmail.com>, mrtg at list.ee.ethz.ch
>Subject: RE: [mrtg] hacking cfgmaker
>Date: Wed, 25 Oct 2000 17:03:04 -0500
>
>I didn't change Cfgmaker, but I did run it against a Compaq server to
set 
>up
>the network utilization.  Also, I have manually added 3 other
measurements
>that were important to me (CPU Utilization, Memory Utilization, and
Disk
>Utilization).  I don't exactly have the memory utilization configured
>correctly (It only populates the first line of the log file), I think
it is
>something with my Target line calculations.  Hope this helps.
>
>John
>
>Here a sample cfg I use for a Compaq ProLiant ML370:

[deleted useful configs]
________________________________________________________________________
_
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.

Share information about yourself, create your own public profile at 
http://profiles.msn.com.


    ----------------------------------------------------------------
    This  electronic mail  message contains CONFIDENTIAL information
    which is (a) ATTORNEY - CLIENT  PRIVILEGED  COMMUNICATION,  WORK
    PRODUCT,  PROPRIETARY IN  NATURE, OR  OTHERWISE PROTECTED BY LAW
    FROM  DISCLOSURE,  and  (b) intended  only for  the  use  of the
    Addressee(s)  named  herein. If you are not an Addressee, or the
    person  responsible for delivering this to an Addressee, you are
    hereby  notified  that  reading,  copying,  or distributing this
    message is prohibited. If you have received this electronic mail
    message  in error, please reply to the sender and take the steps
    necessary  to delete  the message  completely from your computer
    system. Thank you.



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi