[mrtg] Re: Printing misconfiguration?

[Roth, Gabrielle]

Looking at your original confg (which I egregiously snipped from your
original post, apologies):
Target[HP8000]:
.1.3.6.1.2.1.43.10.2.1.4.1.1&.1.3.6.1.2.1.43.10.2.1.4.1.1:public at ipaddress
Options[HP8000]: nopercent, perminute
MaxBytes[HP8000]: 1024000
Title[HP8000]: HP8000: Pages Printed
YLegend[HP8000]: Pages
ShortLegend[HP8000]: Pages
PageTop[HP8000]: <H1>Pages Printed</H1>

As long as you left the 'YLegend' and 'ShortLegend' tags as they are here,
you should get 'Pages' instead of bytes.  I've noticed that sometimes when I
change something in my config, it will take a couple of polling cycles to
correct in the graphs.   Hopefully it's corrected itself by the time you get
this.

-gr 

> -----Original Message-----
> From: Tim Lovelace [mailto:tlovelace at terminix.com]
> Sent: Friday, October 27, 2000 12:49 PM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Printing misconfiguration?
> 
> 
> 
> When I use gauge it no longer returns Pages but kb's. The 
> whole goal of the
> config is to tell me the pages printed per minute
> 
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch 
> [mailto:mrtg-bounce at list.ee.ethz.ch]On
> Behalf Of Roth, Gabrielle
> Sent: Friday, October 27, 2000 2:17 PM
> To: 'Tim Lovelace'; mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Printing misconfiguration?
> 
> 
> 
> http://ee-staff.ethz.ch/~oetiker/webtools/mrtg/reference.html#options
> 
> Read the section on 'gauge'.
> 
> -gr
> 
> > Does anyone see a reason, or
> > have an idea,
> > why I am not getting any data.
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi