[mrtg] Re: Memory Oid for Cisco 720X Router

[Tim Harden]

No..  just 0.0 across the board

the OID's that I have tried for used mem are:
1.3.6.1.4.1.9.9.48.1.1.1.5.1
1.3.6.1.4.1.9.9.48.1.1.1.5.2
1.3.6.1.4.1.9.2.1.8.0

Tim H

-----Original Message-----
From: tkennedy at watcher.newsreal.com
[mailto:tkennedy at watcher.newsreal.com]On Behalf Of Tim Kennedy
Sent: Thursday, September 14, 2000 11:00 AM
To: Tim Harden
Cc: mrtg at list.ee.ethz.ch
Subject: [mrtg] Re: Memory Oid for Cisco 720X Router


Is the flat line that you are seeing a non-zero value?

used and free memory doesn't usually change all that much, unless you
are wildly changing the configurations and purposes of your routers.

How about the legend?  Is that telling you free/used stats/percentages?

-Tim

On Thu Sep 14, 2000 at 10:36:16AM -0400, Tim Harden wrote:
>
> Sorry.  The scripts run and it seems to update (i.e. adds enters in the
log
> file) but nothing comes up on the graph.  Just a flat line!
>
> I am thinking I have now found the correct OID.
>
> I did a snmpwalk down the router one day.  I started with 1.3.6. and let
it
> run all the way down the OID tree while porting the output to a file.
> I did this twice: one with output set for OID and once with output set for
> MIB.
> I did not find a memory MIB or OID any where..  Not sure why I didn't get
> it..
>
> Thanks for the help.
>
> -----Original Message-----
> From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
> Behalf Of Roth, Gabrielle
> Sent: Thursday, September 14, 2000 10:10 AM
> To: mrtg at list.ee.ethz.ch
> Subject: [mrtg] Re: Memory Oid for Cisco 720X Router
>
>
>
> > I have tied a bunch of OID's for the memory on my router and non work.
> > I have IOS 12.05(t).  I was hoping that someone could tell me
> > the OID for
> > the Memory?
>
> How do they 'not work'?  Did you try an snmpget from the command line?  Do
> you get an error when you run mrtg with those OIDs?  Do you get no error
> messages, but your graphs don't update?  Are you getting graphs, but the
> data is unrealistic?
>
> -gr
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>
>
> --
> Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
> Archive     http://www.ee.ethz.ch/~slist/mrtg
> FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
> WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi
>
--
Timothy Kennedy
Network Operations Manager
YellowBrix, Inc.
tkennedy at yellowbrix.com
Cell: 703-216-5957

-- Binary/unsupported file stripped by Listar --
-- Err : No filename to use for decode, file stripped.
-- Type: application/pgp-signature


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi