[mrtg] Re: Memory Oid for Cisco 720X Router

[Tim Harden]

Thanks for all the help that everyone gave me..  I am getting results now.
I do have one more question though.

How can I verify that I have the correct value of memory in my cfg file?
I thought I had 36mb in it.  4mb on the NPE and 32mb added, but when I do a
show ver or show mem non of the values match what I thought I put in it.

Just wanted to know so that my graphics are showing correct amounts.

thanks

-----Original Message-----
From: mrtg-bounce at list.ee.ethz.ch [mailto:mrtg-bounce at list.ee.ethz.ch]On
Behalf Of Roth, Gabrielle
Sent: Thursday, September 14, 2000 11:35 AM
To: Mrtg List (E-mail)
Subject: [mrtg] Re: Memory Oid for Cisco 720X Router



> > Sorry.  The scripts run and it seems to update (i.e. adds
> > enters in the log
> > file) but nothing comes up on the graph.  Just a flat line!

> No..  just 0.0 across the board

It sounds like you don't have the 'gauge' option turned on
for these targets in your config.  For things like memory,
temperature, etc that aren't 'counter' variables, you need to
tell mrtg to just measure the current value instead of doing
the delta.

-gr

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi