[mrtg] cfgmaker.cisco woes

[James H. Page]

decided to try out the mrtg-2.8.12/contrib/cfgmaker_cisco/cfgmaker.cisco
script to get the following from my CAT 5500s

from README
" This version also grabs and shows all non-VLAN1 VLANS in a
different color, plus provides aggregate VLAN traffic statistics as well by
finding out what ports are in the VLAN, then adding those ports together.
This means of course that a port will be "hit" however many times it is in
a VLAN."

sounds pretty slick but .......

the cfg file that it creates seems to be missing the Target lines from  69 on(see below) causing mrtg to choke.

any ideas ??

thanks,

jim


#---------------------------------------------------------------

Target[rrc2-5500 .69]: 69:public at rrc2-5500
Directory[rrc2-5500 .69]:RRC2-5500
MaxBytes[rrc2-5500 .69]: 12500000
Title[rrc2-5500 .69]: RRC2-5500  (): Port 2/12, <font color="#8C1717"> Vlan
999 </font>, multi mode fiber fast ethernet
PageTop[rrc2-5500 .69]: <H1>Traffic Analysis for Port 2/12, <font color="
#8C1717"> Vlan 999 </font>, multi mode fiber fast ethernet
 </H1>
 <TABLE>
   <TR><TD>System:</TD><TD>RRC2-5500  in RRC-2D141</TD></TR>
   <TR><TD>Maintainer:</TD><TD>xxxxxxxxxxx X5331</TD></TR>
   <TR><TD>Interface:</TD><TD>Port 2/12, <font color="#8C1717"> Vlan 999
</font>, multi mode fiber fast ethernet (69)</TD></TR>
   <TR><TD>IP:</TD><TD> ()</TD></TR>
   <TR><TD>Max Speed:</TD>
       <TD>12.5 MBytes/s (ethernetCsmacd)</TD></TR>
  </TABLE>

#---------------------------------------------------------------

NO TARGET LINE !!!!!!
Directory[rrc2-5500 .70]:RRC2-5500
MaxBytes[rrc2-5500 .70]: 12500000


--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi