[mrtg] Re: ATM Trunk Utilization

[Griner, Jeremy]

Try an snmpwalk to verify you have the correct oid:
snmpwalk igx public .iso.3.6.1.4.1.351.100.4.2.4.2.1.6

When I execute this command I get:
.iso.3.6.1.4.1.351.100.4.2.4.2.1.6.16010000 = 11380
.iso.3.6.1.4.1.351.100.4.2.4.2.1.6.16030000 = 10253
[for trunks on slot 16 port 1 and port 3]

so it would seem you have your slot/port reversed in your config target.
Also it looks like you are polling 6-atmTrkStatsTxBdataBPktDrps so if you
aren't getting data that is a good thing.  Try polling
25-atmTrkStatsTotalCellsTxtoLns and 26-atmTrkStatsTotalCellsRxFromPorts

Here is my target:
Target[igx.ny.trkUtil]:1.3.6.1.4.1.351.100.4.2.4.4.1.26.11010000&1.3.6.1.4.1
.351.100.4.2.4.4.1.25.11010000:public at igx

Jeremy

> -----Original Message-----
> From:	Kannan Ramanujam [SMTP:kannan2778 at yahoo.com]
> Sent:	Saturday, April 21, 2001 4:24 AM
> To:	Griner, Jeremy; mrtg at list.ee.ethz.ch
> Subject:	RE: [mrtg] ATM Trunk Utilization
> 
> Hi
> 
> I tried the oid I found from the mailing list archive
> and from the mrtg repository from omix.com..but I do
> not see any traffic on a fully utilized trunk..Please
> see my cfg file sample..I wld like to know if I should
> be doing anything extra in my cfg file ..I have
> attached my CFG file..please advice
>                                                       
> 

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi