[mrtg] Re: MRTG Crashes on Windows

[Hunt, Jim]

I get an illegal opperation and it says an invalid instruction was issued.
Very cryptic.  I have the lasest MRTG, PERL, and Windows updates on a 98se.

-----Original Message-----
From: Hunt, Jim
To: 'mrtg at list.ee.ethz.ch'
Sent: 8/20/01 2:09 PM
Subject: [mrtg] MRTG Crashes on Windows


I have installed MRTG on several dozen Windows NT and Windows 98
Platforms without any problems.  Today is a different story.

I install MRTG and Perl and ran cfgmaker without an error.  However,
running the file with mrtg causes a crash of the dos box and there is no
output files and no error from MRTG or Perl.

Here is the cfg file:

# Created by 
# cfgmaker public at 172.16.1.1 --global 'WorkDir: C:\mrtg\html' --output
cisco.cfg


### Global Config Options

#  for UNIX
# WorkDir: /home/http/mrtg

#  or for NT
# WorkDir: c:\mrtgdata

### Global Defaults

#  to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits


######################################################################
# System: HSMS
# Description: Cisco Internetwork Operating System Software 
#          IOS (tm) C1700 Software (C1700-Y-M), Version 12.0(3)T3,
RELEASE SOFTWARE (fc1)
#          Copyright (c) 1986-1999 by cisco Systems, Inc.
#          Compiled Thu 15-Apr-99 13:58 by kpma
# Contact: 
# Location: Server Room
######################################################################


### Interface 1 >> Descr: 'FastEthernet0' | Name: 'Fa0' | Ip:
'172.16.1.1' | Eth: '00-d0-06-02-1a-69' ###

Target[172.16.1.1_1]: 1:public at 172.16.1.1:
SetEnv[172.16.1.1_1]: MRTG_INT_IP="172.16.1.1"
MRTG_INT_DESCR="FastEthernet0"
MaxBytes[172.16.1.1_1]: 12500000
Title[172.16.1.1_1]: Traffic Analysis for 1 -- HSMS
PageTop[172.16.1.1_1]: <H1>Traffic Analysis for 1 -- HSMS</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>HSMS in Server Room</TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>FastEthernet0 connected to EthernetLAN_1
</TD></TR>
   <TR><TD>ifType:</TD>     <TD>ethernetCsmacd (6)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Fa0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>12.5 MBytes/s</TD></TR>
   <TR><TD>Ip:</TD>         <TD>172.16.1.1 ()</TD></TR>
 </TABLE>


### Interface 2 >> Descr: 'Serial0' | Name: 'Se0' | Ip: '' | Eth: '' ###

Target[172.16.1.1_2]: 2:public at 172.16.1.1:
SetEnv[172.16.1.1_2]: MRTG_INT_IP="" MRTG_INT_DESCR="Serial0"
MaxBytes[172.16.1.1_2]: 193000
Title[172.16.1.1_2]: Traffic Analysis for 2 -- HSMS
PageTop[172.16.1.1_2]: <H1>Traffic Analysis for 2 -- HSMS</H1>
 <TABLE>
   <TR><TD>System:</TD>     <TD>HSMS in Server Room</TD></TR>
   <TR><TD>Maintainer:</TD> <TD></TD></TR>
   <TR><TD>Description:</TD><TD>Serial0 connected to Howard </TD></TR>
   <TR><TD>ifType:</TD>     <TD>ppp (23)</TD></TR>
   <TR><TD>ifName:</TD>     <TD>Se0</TD></TR>
   <TR><TD>Max Speed:</TD>  <TD>193.0 kBytes/s</TD></TR>
 </TABLE>


### Interface 3 >> Descr: 'Null0' | Name: 'Nu0' | Ip: '' | Eth: '' ###
### The following interface is commented out because:
### * it is a cisco Null0 interface
# 
# Target[172.16.1.1_3]: 3:public at 172.16.1.1:
# SetEnv[172.16.1.1_3]: MRTG_INT_IP="" MRTG_INT_DESCR="Null0"
# MaxBytes[172.16.1.1_3]: 536870911
# Title[172.16.1.1_3]: Traffic Analysis for 3 -- HSMS
# PageTop[172.16.1.1_3]: <H1>Traffic Analysis for 3 -- HSMS</H1>
#  <TABLE>
#    <TR><TD>System:</TD>     <TD>HSMS in Server Room</TD></TR>
#    <TR><TD>Maintainer:</TD> <TD></TD></TR>
#    <TR><TD>Description:</TD><TD>Null0  </TD></TR>
#    <TR><TD>ifType:</TD>     <TD>Other (1)</TD></TR>
#    <TR><TD>ifName:</TD>     <TD>Nu0</TD></TR>
#    <TR><TD>Max Speed:</TD>  <TD>536.9 MBytes/s</TD></TR>
#  </TABLE>


WorkDir: C:\mrtg\html

Thanks in advance.

Jim

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi