[mrtg] Re: monitoring a cisco 3640..-->MIBS

[Hans van Beek]

Actually the CISCO-PROCES-MIB is added as of IOS version 12.0T
and 
the CISCO-MEMORY-POOL-MIB is added as of IOS version 11.1(2)
So you need at least these version to be able to use the provided OID's
You can use the OLD-CISCO-CPU-MIB to graph cpu usage from devices with older
IOS's 
five min cpu usage: 1.3.6.1.4.1.9.2.1.58.0
and
OLD-CISCO-MEMORY-MIB to graph memory from devices with older IOS's 
free mem: 1.3.6.1.4.1.9.2.1.8.0
It's of course better to not use the old mibs when the newer ones are
supported in
your IOS release. Though I myself still have some config's which use some
old OID's :)

Greetz,

Hans

>These mibs are known as the
>CISCO-PROCESS-MIB and the CISCO-MEMORY-POOL-MIB.

>...

>This same setup should be fine on virtually any router made by Cisco with
an
>IOS version greater than 10.3.  You may need to walk the mibs to check the
>cpu instance or the memory pool instance, but these should work fine for a
>3640.



--
Unsubscribe mailto:mrtg-request at list.ee.ethz.ch?subject=unsubscribe
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi